http://www.aros.org AROS-Exec AROS-Exec Archives Power2People
kitty mascottop logo menu

AROS Application Development Manual -- Introduction

Index

Προειδοποίηση

This document is not finished! It is highly likely that many parts are out-of-date, contain incorrect information, or are simply missing altogether. If you want to help rectify this, please contact us.

Developing for the AROS platform

This chapter explains how to develop programs that will run on the AROS platform. It also tells you how to compile them on the different machines that AROS runs on. It assumes that you have an average knowledge of the C programming language and of basic concepts like linking.

The "Hello, World!" program

Below is a program that shows a "Hello, World!" message - a programmer's tradition since ages (well: 1972). Create a file helloworld.c with the following contents:

#include <stdio.h>

int main(void)
{
  puts("Hello World");
  return 0;
}

Compiling in the AROS source tree with the build system

If you have your own source tree of AROS and compiled AROS there, you can use the AROS build system to compile programs for AROS. You do this by putting your program source code somewhere in the AROS tree. First, make a directory there, assuming you are in the top AROS source directory:

% mkdir local
% mkdir local/helloworld

Put the helloworld.c file there, plus an additional file for the build instructions named mmakefile.src, with the following contents:

include $(TOP)/config/make.cfg

%build_prog mmake=local-helloworld files=helloworld progname=HelloWorld

In the top AROS source directory you can now build the helloworld program with the following command:

% make local-helloworld

After doing so, you'll find the compiled program as local/helloworld/HelloWorld in the binary tree of AROS.

The AROS build system is meant to ease your life when building binaries with not-trivial dependencies. It is explained in a separate chapter.

Compiling on Linux with the "fake" GCC

Under AROS/hosted you are using a configured version of the Linux GCC. There is a difference depending on whether you use the compiled version of AROS (i386-linux-system) or you compile the source yourself:

  • i386-linux-system

    You have to download the package i386-all-sdk. Unpack it, cd into the created directory and start the included script as root (e.g. sudo AROS-SDK-Install). The script asks some questions but you can use the default values. The next step is to add a path. It depends on the shell you are using how this can be done. Assuming you're using the Bash and you have kept the default values for the paths: open the file /home/user/.bashrc and add the line PATH=/usr/local/aros-sdk/bin:"${PATH}" at the end of the file. Type i386-aros-gcc -v in a new shell for a quick test.

  • self-compiled

    The AROS compiler has the path AROS/bin/linux-i386/tools. Add this path as shown above. The name of the compiler is i386-linux-aros-gcc.

You can compile the program with the following command from a Linux shell:

% i386-linux-aros-gcc -o helloworld helloworld.c

You will find additional tools in the path of the AROS C compiler: AROS versions of ld, ranlib, the catalog compiler FlexCat, etc.

Σημείωση

If you are using i386-linux-aros-strip you have to add the parameters --strip-unneeded --remove-section .comment. Otherwise strip will create corrupt binaries.

Compiling on Linux or Windows with a cross-compiler

You can download a cross-compiler from here.

Advantage over the fake compiler is, that you can additionally compile C++ sources. After installing you should update the sys-includes and the libs from a recent SDK.

Compiling for native-i386

You can download a version of GCC which runs natively under AROS from Sourceforge. You need at least the binutils and the core. Also you'll need an AROS SDK. Unpack them to the same place (for example, sys:ADE). Copy the includes and libs from the SDK to sys:ADE.

Then you'd need to use the following commands:

path sys:ade/bin add
assign Development: sys:ade

Concepts

Include files

AROS comes with a variety of include files. They are placed in sys:Development/include. The subdirectory proto contains include files with function prototypes for the shared libraries. In libraries are headers with structures and defines. Some of the bigger libraries, like Intuition, have their own directory with headers.

AROS shared libraries

Shared libraries are the magic that makes AROS work. Every library is a collection of functions that fulfil a certain purpose. Normally, functions with a similar purpose are contained in one library. For example all the basic memory handling functions are contained in exec.library.

Libraries are normally found in the LIBS: directory, but can also be stored at other places. Some important libraries are not stored as a separate file, but are contained in the kernel. However, exactly which libraries are part of the kernel differs between installations, so don't depend on a specific library being part of the kernel.

AROS core libraries overview

Here is a list of some important libraries and their purposes. You don't have to remember all of these; they will be discussed in detail later on.

  • exec.library is the most important library. It is responsible for handling the most basic things, like managing tasks (i.e. programs), memory, libraries and many other things.
  • utility.library implements very important mechanisms for "talking" to libraries: taglists, which will be discussed later in this chapter, and hooks. Apart from that, utility contains miscellaneous small utility functions.
  • dos.library is responsible for file-handling and some basic I/O functions. Without dos, AROS would not be able to access files.
  • intuition.library handles graphical user interfaces (GUIs). With Intuition you can create windows and gadgets and handle them accordingly. Working on top of intuitions are several other libraries, providing more-sophisticated and more-specialised GUI functions. Examples are muimaster.library, which implements some more complicated gadgets and asl.library, which provides file- and other requesters.
  • graphics.library contains drawing functions.
  • cybergraphics.library extents graphics.library by functions for true- and high-color bitmaps.
  • muimaster.library provides an advanced object-oriented mechanism for gadgets (a.k.a widgets on other platforms). Therefore it replaces fully or partially gadtools.library, boopsi.library reqtools.library asl.library and intuition.library.
  • datatypes.library implements an object-oriented interface to all kinds of multimedia data.
  • asl.library handles requesters for fonts, files and screens.
  • locale.library makes AROS international. It provides functions for loading catalogs with translated strings.
  • keymap.library translates between keyboard and ANSI codes.
  • workbench.library and icon.library contain support functions for the AROS GUI "Wanderer".
  • diskfont.library loads fonts from disk.
  • commodities.library is for programs that watch and manipulate the input event stream, e.g. programs which react to hot keys.
  • iffparse.library supports reading and writing of data which is written in IFF format. This format is mainly used for configuration data and graphics/music/text.
  • bsdsocket.library for network support.
  • rexxsupport.library and rexxsyslib.library are useful when you want to extend your programs with the AREXX macro language.

Some additional libraries for very specific tasks, aren't mentioned here.

How AROS libraries work

The term library usually refers to an object whose purpose is to collect in a single place functions that may appear in programs more often, usually with all such functions serving one common purpose. E.g. libraries to parse configuration files, to handle localization, and other kinds of tasks which a program might have to perform.

A distinction can be made between link-time libraries and run-time libraries. The link-time libraries, as the name suggests, are used only at the program linking stage: the linker collects from the provided libraries just those functions the program requires and together with the program links them into one executable. Run-time libraries, instead, are made available to programs when they are run or during their execution by special request of the program. In most systems the run-time libraries are shared between running programs so they only take up memory for one instance of the library. In such cases the object is often called a shared library.

Whilst link-time libraries are handled more or less the same way across all operating systems, since they're independent of the OS itself, run-time libraries may be handled differently by different OS-s. In AROS, before a library can be used in a program it has to be opened. This is done by calling the exec function called OpenLibrary. When a library is successfully opened a pointer to the so called library base is return. The library base is a zone of memory that both holds the function vectors and the library's own data [1]. When libraries are opened they are free to choose whether their bases will be the same for all instances or whether a new one will be allocated each time it's opened. When a function of the library is called, most of the time the library base is passed to the function so the data in the library base can be accessed from inside the library [2]. A library can make part or all of the data in the library base public, by defining a type for the base. Where this is the case you'll find the type in the include file proto/libname.h. This mechanism is used by a number of older libraries, but more recent libraries usually keep all their data private. The only way to change the state of such a library, is through the use of the available functions.

[1]If you know C++, you might think of the vectors table as the VTable used for virtual methods, and the library base pointer as the this pointer.
[2]The passing of the library base may be explicit or implicit, depending on the convention used by the library. Also several mechanism may be used for the implicit passing of the base: C preprocessor macros, inline functions, global variables, ...

How to use AROS shared libraries

As already explained in the previous section, libraries have to be opened before their functions may be used. Additionally, you have to include a header to make the prototype of the functions known to the code. This include file is in the proto directory, so if you want to use functions of dos.library you have to use the following line:

#include <proto/dos.h>

The only library that never has to be opened first is exec.library. Exec is always open and your compiler knows how to access it. Your compiler or build environment may additionally open some other libraries for you, so you don't have to open them manually. Read your compiler's manual to learn about such a feature. The paragraphs below list which libraries are opened by the AROS tools, and describe how one opens libraries manually.

Auto-opening by gcc from the AROS SDK

The gcc compiler from the AROS SDK auto-opens the following core libraries:

  • aros.library
  • asl.library
  • commodities.library
  • cybergraphics.library
  • datatypes.library
  • diskfont.library
  • dos.library
  • expansion.library
  • gadtools.library
  • graphics.library
  • icon.library
  • iffparse.library
  • intuition.library
  • keymap.library
  • layers.library
  • locale.library
  • muimaster.library (which is provided by Zune on AROS)
  • partition.library
  • realtime.library
  • utility.library
  • workbench.library

You can disable the auto-opening of these library by providing the -nostdlibs flag to the gcc compiler. For the other libraries provided by AROS you can use the corresponding link-time library that will take care of opening the library. So if your programs uses reqtools.library you add -lreqtools to the gcc command.

Σημείωση

To summarise: when using the AROS gcc compiler the usage of shared libraries becomes very easy and can be done in two steps:

  • Use an include statement to declare the functions of the library:

    #include <proto/reqtools.h>
    
  • Add an extra link library if the library is not auto-opened by gcc:

    % i386-linux-aros-gcc ... -lreqtools
    

Auto-opening by the AROS build system

Auto-opening libraries by the build system is very similar to using the AROS gcc compiler. Analog to specifying a -l option, you specify the libs you use in the uselibs parameter to the %build_prog and the %build_module macro. More information can be found in the build system tutorial.

Manually open libraries

To open a library you have to use a function of exec.library:

#include <proto/exec.h>

struct Library *OpenLibrary( STRPTR name, ULONG version );

OpenLibrary() takes two arguments:

name

points to the name of the library. Normally this is just the plain name, but this can also be a complete (absolute or relative) path to the library.

Σημείωση

Paths do not work with kernel-based libraries (i.e. libraries that are included in the kernel). Use absolute path only, if you know exactly, what you are doing!

version
is the minimal version of the library to open. If the named library is found, but its version is lower than version, the library will not be opened, but an error will be returned. Versions are important, because libraries are supposed to be expandable. Some functions are only available from a certain version of a library on. For example the function AllocVec() of exec.library was introduced in version 36 of the library. If you try to call this function with lower versions of exec.library installed, unexpected things will happen (most likely the application will crash).

The following procedure is used to load the library to open:

  1. First, the name of the library is searched in the list of already loaded libraries. If this library was loaded into memory before (e.g. by a different program) and still is there, everything is fine and OpenLibrary() returns immediately.

    Libraries in the kernel are always on the list of loaded libraries.

    Σημείωση

    Comparisons in this list are case sensitive! Be sure to use the right case in name. Normally all characters in a library name are lower-case.

  2. If the library was not found in the resident list and a path was supplied with name, an attempt is made to open the indicated file. If this fails, OpenLibrary() returns an error.

  3. If instead a plain library-name was given, the library is searched for in the current directory first. If it's not found there, it is searched for in the directory LIBS:.

OpenLibrary() returns either a pointer to a structure, describing the library (struct Library * defined in exec/libraries.h) or NULL, meaning that opening the library failed for some reason. The resulting pointer has to be stored for the compiler's use. Normally it is stored in a variable in the form: <libraryname>Base, e.g. IntuitionBase for the pointer to intuition.library.

After opening the library, you can use its functions by just calling them like any other function in your program. But to let your compiler know, what to do, you have to include the library-specific header-file. This is normally called proto/<libraryname>.h for C compilers.

When you've finished using the library, you have to close it again to free the resources it uses. This is done with:

#include <proto/exec.h>

void CloseLibrary( struct Library *base );

CloseLibrary() closes the library pointed to by base. This may also be NULL, in which case CloseLibrary() does nothing.

The use of libraries will be demonstrated by creating a small graphical hello-world program. Instead of printing Hello World! to the console, it will be displayed it in a requester. A function to display a requester is EasyRequestArgs(), which is a function of intuition.library. Its usage will not be discussed here; for more information, see the section about Requesters.

Example usage of libraries:

#include <proto/exec.h>          /* OpenLibrary() and CloseLibrary() */
#include <exec/libraries.h>      /* struct Library */
#include <dos/dos.h>             /* RETURN_OK and RETURN_FAIL */
#include <proto/intuition.h>     /* EasyRequestArgs() */
#include <intuition/intuition.h> /* struct EasyStruct */

/* This variable will store the pointer to intuition.library */
struct IntuitionBase *IntuitionBase;

int main(int argc, char *argv[])
{
    /* Needed for EasyRequestArgs(). */
    struct EasyStruct es = {
      sizeof(struct EasyStruct), 0UL,
      "Requester", "Hello World!", "Ok"
    };

    /* First, open intuition.library. Version 36 or better is needed,
       because EasyRequestArgs() was introduced in that version of
       intuition.library.
    */
    IntuitionBase = (struct IntuitionBase *)OpenLibrary("intuition.library", 36);

    /* Ccheck that intuition.library was successfully opened.
       If it was not, return immediately with an error, as you can't call
       a function from the library.
    */
    if (!IntuitionBase)
        return RETURN_FAIL;

    /* After opening intuition.library, you can call EasyRequestArgs(). */
    EasyRequestArgs(NULL, &es, NULL, NULL);

    /* Finally, close intuition.library again. */
    CloseLibrary((struct Library *)IntuitionBase);

    return RETURN_OK;
}

Try to compile and run this program. It should present you with a handsome hello-world requester.

Versioning of libraries

Shared libraries may evolve over time and new features may be introduced. If a program were to use a feature of a more recent version of the library, running it on a machine that had an older version of the library would most likely lead to a crash. Therefore, versioning of libraries was introduced, so programs can check whether the version of a library is adequate and quit gracefully or reduce the functionality accordingly if it isn't. On AROS and Amiga-like systems, the version is determined by a major number and a minor number (also respectively called version and revision). A new major number indicates the introduction of new features while an increase of the minor number just indicates some optimizations and/or bug fixes, with compatibility. A version of a library is often presented as major.minor [3] and can be retrieved with the version dos command:

5.System:> version dos.library
dos.library 41.7

When opening a library, you can provide a version number; opening the library will then fail if the version of the library is lower than this number:

mylibbase = OpenLibrary("my.library", 2);

This will return NULL if only version 1 of my.library is installed. If you use auto-opening of libraries the library will be opened with the version of the library used during link time. This version can be overloaded with a variable named libbasename_version. At the moment the version of dos.library is 41 and this means that programs compiled will only run on other systems that have version 41 of dos.library. If you are sure you're only using features from up to version 36, you can let your program run on these systems by including the following statement somewhere in your code:

const LONG DOSBase_version = 36;

The consequence for libraries is that they always have to be backwards compatible: if the version of your library is 41 but the program was compiled for version 36 it still need to run without problem. Therefore a function at a certain place in the lookup table always has to perform the exact same function even for a newer version of the library.

If you really want to change the behaviour of the function with a certain name you could do that by putting it at another place in the lookup table. At the old location you put then a compatibility function that is still compatible with the behaviour in older library versions. For example, in the first version of AmigaOS the exec function OpenLibrary did not have a version parameter. In a later version of the OS, a new OpenLibrary function was introduced that included the version parameter. While the old function was at position 68, the new function was put at location 92. The function at position 68 was kept for compatibility, but was renamed to OldOpenLibrary.

[3]Contrary to what some people think the major.minor version is not a numeric value for the Amiga family of OS-s: the revision coming after 1.9 is 1.10 and 1.09 is not a valid version number on AmigaOS.

Difference with other run-time library systems

The AROS shared libraries have an unique architecture with advantages and disadvantages. Some aspects will be discussed later in this chapter. Windows and Unix(-like) systems are usually taken as reference in those discussions, as for those who port programs the differences are important.

Loading of the shared libraries

On AROS the dynamic link libraries are relocatable ELF objects. The first time a library is opened, it is loaded from disk and relocated with the start address it was loaded to. On AROS and Amiga-like systems, memory is shared between all code running on the system as a single big memory region. This approach allows all programs to use the library loaded at the memory it was loaded to.

Other systems, including Windows and Unix, have a different virtual address space for each process. Here too the OS tries to load the shared library only once and it then maps the same library in the address space of each of the processes using it. The library may thus be located at different addresses in the different spaces and the OS has to handle this.

Windows will first try to locate the shared library at a single location in memory and tries to map it to the same memory region in each process that uses the library. If this is not possible the library will be duplicated in memory. On most Unix systems this problem is avoided by letting the compiler generate position independent code, e.g. code that works at any position in memory without having to relocate the code. Depending on the architecture this type of code may have less or more impact on the speed of the generated code.

Dynamic linking of functions

Programmers that use a higher level language for accessing the functions in a shared library, will use the name of the function they want to use. When a microprocessor executes a program, it uses memory addresses to jump to a certain function. At some point, the name used by the programmer has to be translated into a memory address.

On the Amiga, the translation happens when the code is compiled or when a program or module is linked. Every libbase of an AROS library contains a lookup table for the functions of the library. During compilation (or linking) the name of a function is translated into a position in this table where the address of the function can be found [4]. Functions in an AROS shared library are thus accessed with one level of indirection. Depending on the CPU architecture this level of indirection may have more or less influence on the speed of the code. Fortunately, a similar type of indirection is used for calling virtual functions of C++ classes and because of this, most modern CPUs are optimized to handle the indirection without a (big) impact on the speed. As the lookup table is attached to the libbase it has to be duplicated for libraries that use a per-opener base.

On Windows and Unix-like systems the translation of the name of a function to an address is done when the program is loaded and linked at run-time with shared library [5]. When the program is linked at compile time a list of libraries is put in the executable together with a list of the functions to be used. These lists are ASCII strings. When the program is then loaded it will convert the functions names to their addresses (or to a pointer in a lookup table). First the libraries in the library list are opened, afterwards each of the functions is looked up in the libraries. Different mechanisms are used for the lookup of the function names. For example on Windows, the functions available are put in a sorted array so a binary search can be performed and on Linux hashes are used to speed up the lookup.

Global and static variables in libraries

As said in a previous paragraph, AROS shared libraries are only loaded into memory and initialised once. This also has an impact on the way global and static variables are handled. You can declare a global variable in the source code of your library in the following way:

int globvar;

This will create a global variable that is accessible in all parts of the library. Once the shared library is loaded into memory your variable will also be located in the memory taken by the library and will always stay at the same location until the library is unloaded from memory. Static variables defined in a function are handled in an analog way. This also means that the code in the library accessing a global variable will always go to the same location no matter how many times the library is opened or which program called the library code. Currently, the only way to have a variable that has a different value per opener of the library is to have a library with a per-opener base and store the library in this base. Also, global variables in AROS shared libraries currently can't exported. They can only be accessed within the library itself; a program using a library can not access the library's global variables directly. In this respect, variables in AROS shared libraries are handled differently from variables in link-time libraries. A global variable defined in a link-time library is also accessible by the program to which the library is linked and every program linked with the same link-time library will have its own version of the global variable.

On Unix, shared libraries were introduced after the link-time libraries were already heavily used. One of the design goals then, was to make the behaviour of the shared libraries the same as that of link-time libraries. Therefore, a copy is made of the variables every time a program opens a shared library. In this way every program that opens a shared library will get its own set of the global variables. Also, the global variables of a shared library are automatically exported from that library, so they can also be accessed directly in the program using that library.

On Windows, one can choose the behaviour of global variables to be like the AROS way or the Unix way but by default it is handled in the Unix way.

For porting shared libraries to AROS or Amiga, this different handling of variables has to be taken into account. Some libraries depend on how variables are handled in Unix and Windows shared libraries and may be difficult to port to AROS.

Σημείωση

The explanation in this paragraph describes how the handling of data in shared libraries worked when the text was written. At that time there was also discussion on how to extend this to also allow handling similar to the handling done by other library types.

Libraries using other libraries

A library can open another library. When a library opens another library it will get a libbase for that library. This means that a library that has a per-opener base will return a unique libbase to another library. When a program opens library 1 with a per-opener base, it will get a libbase back. If that program then opens library 2, that itself also opens library 1, then library 2 will get a different base for library 1 than the base the program itself has for that same library 1. Programmers of libraries with a per-opener libbase have to take this into account.

As was already discussed before, on Unix and Windows everything is based on processes. When a program is loaded, a new process is created, every shared library used in that process will only be dynamically linked once into the process. This means that a program and shared library that both access a second shared library will use the same instance of that shared library. Again this different behavior may make porting shared libraries from Unix/Windows difficult.

Σημείωση

Again, the explanation in this paragraph describes how the handling of opening shared libraries from a library worked when the text was written. At that time there was also discussion on how to extend this to also allow handling similar to the handling done by other library types.

[4]In reality, on certain flavours, this table may hold more than just function pointers. On AROS for 68k, in fact, where binary compatibility with AmigaOS (TM) is an issue, every entry in the table contains a JMP instruction followed by the function address (which is thus part of the JMP opcode), and the user programs don't jump to the address in the vector, they jump to the vector itself, and then the JMP instruction redirects the program's flow to the right function.
[5]FIXME: a.out shared libraries, cardinal on Windows, ...

Giving additional arguments with taglists

Every library function takes a fixed number of arguments. This poses quite a problem with complex functions that would need a lot of arguments. To avoid this problem, so-called taglists were introduced. The header file utility/tagitem.h contains a structure TagItem, which includes the members ti_Tag and ti_Data. A taglist consists of an array of this structure. The size of the list is not limited. The field ti_Tag is an identifier (often referred to as Tag) that declares what ti_Data contains. ti_Data is either an integer or a pointer. It is guaranteed to be at least of the size of a long-word or a pointer (whichever is bigger).

In every description of a function that uses a tag-list, all possible tags are listed. Functions have to ignore unknown tags and use defaults for tags not provided, so taglists are a very flexible way of providing arguments to a function.

There are some special tags that all functions understand (defined in utility/tagitem.h):

TAG_DONE and TAG_END
Define the end of a taglist. Every taglist must be terminated with one of them. A following ti_Data must be ignored by the called function, so it doesn't have to exist in memory.
TAG_IGNORE
means that the contents of ti_Data is to be ignored. This tag is especially useful for conditional inclusion of tags.
TAG_MORE
By using this tag, you can link taglists together. ti_Data points to another taglist. Processing of the current taglist will be stopped and instead the new one will be processed. This tag also terminates the current taglist.
TAG_SKIP
forces the parser to skip the next ti_Data tags. They will not be processed.

You may always provide NULL instead of a pointer to a taglist. All functions must be able to handle NULL pointers. They are equal to taglists with TAG_DONE as first tag.

A function that requires a taglist is:

#include <proto/intuition.h>

struct Window *OpenWindowTagList
(
    struct NewWindow *newwin, struct TagList *taglist
);

This function will be discussed in detail in the .. FIXME:: chapter about windows. For now, you just need to know that this function opens a new window. Set the argument newwin to NULL. The only tags looked at for now are:

Tag Description Type
WA_Width Width of window in pixels UWORD
WA_Height Height of window in pixels UWORD
WA_Title Window title STRPTR

Another function needed for your small example is:

#include <proto/intuition.h>

void CloseWindow( struct Window *window );

This function is used to close an opened window.

Now, have a look at another small hello-world-program. This opens a window, which says "Hello World!" in the title-bar, for two seconds:

#include <proto/exec.h>
#include <exec/libraries.h>
#include <proto/dos.h>
#include <proto/intuition.h>
#include <intuition/intuition.h>

struct DosLibrary    *DOSBase;
struct IntuitionBase *IntuitionBase;

int main(int argc, char *argv[])
{
    int error = RETURN_OK;

    /* You need this for Delay() later on. */
    DOSBase = (struct DosLibrary *)OpenLibrary("dos.library", 36);
    if (DOSBase)
    {
        IntuitionBase = (struct IntuitionBase *)OpenLibrary("intuition.library", 36);
        if (IntuitionBase)
        {
            struct Window *win;
            /* Set up your tags. */
            struct TagItem tags[] =
            {
                { WA_Width, 100                  },
                { WA_Height, 50                  },
                { WA_Title, (IPTR)"Hello World!" },
                { TAG_DONE, 0UL                  }
            };

            win = OpenWindowTagList(NULL, tags);
            if (win)
            {
                /* Now wait for two seconds, to show the nice
                   window.
                */
                Delay(100);

                /* Close your window again. */
                CloseWindow(win);
            }

            CloseLibrary((struct Library *)IntuitionBase);
        }
        else
            error = RETURN_FAIL;

        CloseLibrary((struct Library *)DOSBase);
    } else
        error = RETURN_FAIL;

    return error;
}

Of course, this method of setting up the taglist is quite complicated. So for most functions that use taglists short-cuts are available. The link-library amiga.lib provides these short-cuts for all internal AROS functions. These varargs versions can be used like this:

#include <proto/alib.h>

Function( arg1, ..., argn, TAG1, data1, ..., TAG_DONE );

The example above would look like this, using the varargs version of OpenWindowTagList(), called OpenWindowTags():

[...]

if( IntuitionBase )
{
    struct Window *win;

    win = OpenWindowTags
    (
        NULL, WA_Width, 100, WA_Height, 20,
        WA_Title, "Hello World!", TAG_DONE
    );
    )
    if( win )
    {

[...]

Much easier, isn't it?

Getting more documentation

"Hello, World!" is not a Museum of Programmer's Talent, so you might wonder if there is more to AROS than that. Why, yes, of course there is! But this guide is neither a Programmer's Guide nor a Programmer's Reference Guide. Such guides might be written in the future, but for now, the best AROS Programmer's Guides you can find are the books that have been written for the Amiga, and the best reference for AROS are the AROS Autodocs (AROS autodocs are descriptions of AROS library functions that are created by parsing the AROS sources). The Autodocs are mainly useful to advanced Amiga programmers, though: they only provide a very short explanation for each function. If you have to learn AROS programming from the start, you really should try to find that old Amiga book, or buy the Amiga Developer CD-ROM.


Πνευματικά Δικαιώματα © 1995-2024, Η Ομάδα Ανάπτυξης του AROS (The AROS Development Team). All rights reserved.
Amiga® is a trademark of Amiga Inc. All other trademarks belong to their respective owners.