http://www.aros.org AROS-Exec AROS-Exec Archives Power2People
kitty mascottop logo menu

dos

Index


AbortPkt() AddBuffers() AddDosEntry() AddPart()
AddSegment() AllocDosObject() AssignAdd() AssignAddToList()
AssignLate() AssignLock() AssignPath() AttemptLockDosList()
ChangeMode() CheckSignal() Cli() CliInit()
CliInitNewcli() CliInitRun() Close() CompareDates()
CreateDir() CreateNewProc() CreateProc() CurrentDir()
DateStamp() DateToStr() Delay() DeleteFile()
DeleteVar() DeviceProc() DoPkt() DupLock()
DupLockFromFH() EndNotify() ErrorReport() ExAll()
ExAllEnd() Examine() ExamineFH() Execute()
Exit() ExNext() Fault() FGetC()
FGets() FilePart() FindArg() FindCliProc()
FindDosEntry() FindSegment() FindVar() Flush()
Format() FPutC() FPuts() FRead()
FreeArgs() FreeDeviceProc() FreeDosEntry() FreeDosObject()
FWrite() GetArgStr() GetConsoleTask() GetCurrentDirName()
GetDeviceProc() GetFileSysTask() GetProgramDir() GetProgramName()
GetPrompt() GetSegListInfo() GetVar() Info()
Inhibit() Input() InternalLoadSeg() InternalUnLoadSeg()
IoErr() IsFileSystem() IsInteractive() LoadSeg()
Lock() LockDosList() LockRecord() LockRecords()
MakeDosEntry() MakeLink() MatchEnd() MatchFirst()
MatchNext() MatchPattern() MatchPatternNoCase() MaxCli()
NameFromFH() NameFromLock() NewLoadSeg() NextDosEntry()
Open() OpenFromLock() Output() ParentDir()
ParentOfFH() ParsePattern() ParsePatternNoCase() PathPart()
PrintFault() PutStr() Read() ReadArgs()
ReadItem() ReadLink() Relabel() RemAssignList()
RemDosEntry() RemSegment() Rename() ReplyPkt()
RunCommand() SameDevice() SameLock() Seek()
SelectInput() SelectOutput() SendPkt() SetArgStr()
SetComment() SetConsoleTask() SetCurrentDirName() SetFileDate()
SetFileSize() SetFileSysTask() SetIoErr() SetMode()
SetOwner() SetProgramDir() SetProgramName() SetPrompt()
SetProtection() SetVar() SetVBuf() SplitName()
StartNotify() StrToDate() StrToLong() SystemTagList()
UnGetC() UnLoadSeg() UnLock() UnLockDosList()
UnLockRecord() UnLockRecords() VFPrintf() VFWritef()
VPrintf() WaitForChar() WaitPkt() Write()
WriteChars()      

AbortPkt()

Synopsis

void AbortPkt(
         struct MsgPort   * port,
         struct DosPacket * pkt );

Function

This function currently does nothing. You can use WaitForChar()
to poll for characters from an interactive handler.

The planned purpose of this function is:
Tries to abort an asynchronous packet. There is no guarantee
that this succeeds. You must wait with WaitPkt() for the packet
to return before you can reuse or deallocate it.

Inputs

port - The message port to where the packet was sent.
pkt  - The packet to be aborted.

AddBuffers()

Synopsis

LONG AddBuffers(
         CONST_STRPTR devicename,
         LONG numbuffers );

Function

Add or remove cache memory to/from a filesystem. The amount of memory
per cache buffer and the limit depends on the filesystem.

Inputs

devicename - DOS device name (with trailing ':' and NUL terminated).
numbuffers - Number of buffers to add. May be negative for decreasing.

Result

DOSTRUE on success (IoErr() gives the actual number of buffers).
DOSFALSE on error (IoErr() gives the error code).

Example

LONG res1, res2;
res1 = AddBuffers("DF0:", 10);
res2 = IoErr();

Notes

Although some old filesystems return the new buffer count instead of
a success indication, a work-around for that case is built into the
AROS implementation of this function.

AddDosEntry()

Synopsis

LONG AddDosEntry(
         struct DosList * dlist );

Function

Adds a given dos list entry to the DOS list. Automatically
locks the list for writing. There may be not more than one device
or assign node of the same name. There are no restrictions on
volume nodes except that the time stamps must differ.

Inputs

dlist - Pointer to DOS list entry.

Result

DOSTRUE if all went well.
DOSFALSE for errors; IoErr() will return additional error code.

Notes

Since anybody who wants to use a device or volume node in the
DOS list has to lock the list, filesystems may be called with
the DOS list locked. So if you want to add a DOS list entry
out of a filesystem don't just wait on the lock but serve all
incoming requests until the dos list is free instead.

The dlist pointer may become invalid after a call to AddDosEntry()
unless you have locked the DOS list.

AddPart()

Synopsis

BOOL AddPart(
         STRPTR dirname,
         CONST_STRPTR filename,
         ULONG size );

Function

AddPart() will add a file, directory or other path name to a
directory path. It will take into account any pre-existing
separator characters (':','/').

If filename is an absolute path it will replace
the current value of dirname.

Inputs

dirname  - The path to add the new path to.
filename - The path you wish added.
size     - The size of the dirname buffer (must NOT be 0).

Result

Non-zero if everything succeeded, FALSE if the buffer would have
overflowed.

If the buffer would have overflowed, then dirname will not have
been changed.

Example

UBYTE buffer[80];
buffer[0]='\0';
AddPart(buffer, "Work:", 80);
AddPart(buffer, "Programming/Include/exec", 80);

FPuts(Output(), buffer);
--> Work:Programming/Include/exec

AddPart(buffer, "/graphics", 80);

FPuts(Output(), buffer);
--> Work:Programming/Include/graphics

AddPart(buffer, "gfxmacros.h", 80);
FPuts(Output(), buffer);
--> Work:Programming/Include/graphics/gfxmacros.h

AddSegment()

Synopsis

BOOL AddSegment(
         CONST_STRPTR name,
         BPTR seg,
         LONG type );

Function

Adds a program segment to the system resident list. You can later
use these segments to run programs.

The name field should refer to a NULL terminated strings, which
will be copied. The type field determines the type of resident
program. Normal programs should have type >= 0, system segments
should have type == CMD_SYSTEM.

Note that all other values of type are reserved.

Inputs

name            - Name of the segment. This is used by FindSegment().
seg             - Segment to add.
type            - What type of segment (initial use count).

Result

Segment will have been added to the DOS resident list.

!= 0    success
== 0    failure

Bugs

Uses Forbid() based locking.

AllocDosObject()

Synopsis

APTR AllocDosObject(
         ULONG type,
         const struct TagItem * tags );

APTR AllocDosObjectTags(
         ULONG type,
         TAG tag, ... );

Function

Creates a new dos object of a given type. This memory has to be
freed with FreeDosObject().

Inputs

type - Object type.
tags - Pointer to taglist array with additional information. See
       <dos/dostags.h> for a list of all supported tags.

Result

Pointer to new object or NULL, to indicate an error.

AssignAdd()

Synopsis

BOOL AssignAdd(
         CONST_STRPTR name,
         BPTR lock );

Function

Create a multi-directory assign, or adds to it if it already was one.
Do not use or free the lock after calling this function - it becomes
the assign and will be freed by the system when the assign is removed.

Inputs

name - NULL terminated name of the assign.
lock - Lock on the assigned directory.

Result

!= 0 success, 0 on failure. IoErr() gives additional information
in that case. The lock is not freed on failure.

Notes

This will only work with an assign created with AssignLock() or
a resolved AssignLate() assign.

AssignAddToList()

Synopsis

BOOL AssignAddToList(
         CONST_STRPTR name,
         BPTR lock,
         ULONG position );

AssignLate()

Synopsis

BOOL AssignLate(
         CONST_STRPTR name,
         CONST_STRPTR path );

Function

Create an assign for the given name, which will be resolved upon the
first reference to it. If this succeeds (i.e. the path exists and
can be locked) it will be turned into an AssignLock() type assign.
This way you can create assigns to unmounted volumes which will only
be requested when accessed.

Inputs

name  --  NULL terminated name of the assign.
path  --  NULL terminated path to be resolved on the first reference.

Result

!= 0 success, 0 on failure. IoErr() gives additional information
in that case.

AssignLock()

Synopsis

LONG AssignLock(
         CONST_STRPTR name,
         BPTR lock );

Function

Create an assign from a given name to a lock. Replaces any older
assignments from that name, 0 cancels the assign completely. Do not
use or free the lock after calling this function - it becomes
the assign and will be freed by the system if the assign is removed.

Inputs

name -- NUL terminated name of the assign.
lock -- Lock to assigned directory.

Result

!= 0 success, 0 on failure. IoErr() gives additional information
in that case. The lock is not freed on failure.

AssignPath()

Synopsis

BOOL AssignPath(
         CONST_STRPTR name,
         CONST_STRPTR path );

Function

Create an assign for the given name, which will be resolved upon
each reference to it. There will be no permanent lock kept on the
specified path. This way you can create assigns to unmounted volumes
which will only be requested when accessed. Also, using AssignPath()
to assign C: to df0:c would make references go to to df0:c even if
you change the disk.

Inputs

name  -- NULL terminated name of the assign.
path  -- NULL terminated path to be resolved on each reference.

Result

!= 0 in case of success, 0 on failure. IoErr() gives additional
information in that case.

AttemptLockDosList()

Synopsis

struct DosList * AttemptLockDosList(
         ULONG flags );

Function

Tries to get a lock on some of the dos lists. If all went
well a handle is returned that can be used for FindDosEntry().
Don't try to busy wait until the lock can be granted - use
LockDosList() instead.

Inputs

flags  --  what lists to lock

Result

Handle to the dos list or NULL. This is not a direct pointer
to the first list element but to a pseudo element instead.

ChangeMode()

Synopsis

BOOL ChangeMode(
         ULONG type,
         BPTR object,
         ULONG newmode );

Function

Try to change the access mode of a lock or filehandle.

Inputs

type    - CHANGE_FH or CHANGE_LOCK.
object  - Filehandle or lock.
newmode - New mode, either SHARED_LOCK or EXCLUSIVE_LOCK.

Result

!= 0 if all went well, otherwise 0. IoErr() gives additional
information in the latter case.

CheckSignal()

Synopsis

LONG CheckSignal(
         LONG mask );

Function

Checks the current task to see if any of the signals specified in
the mask have been set. The mask of all signals which were set is
returned. The signals specified in the mask will be cleared.

Inputs

mask - The signal mask to check.

Result

The mask of all signals which were set.

Cli()

Synopsis

struct CommandLineInterface * Cli();

Function

Returns a pointer to the CLI structure of the current process.

Result

Pointer to CLI structure.

Notes

Do not use this function to test if the process was started from
the shell. Check pr_CLI instead.

CliInit()

Synopsis

IPTR CliInit(
         struct DosPacket * dp );

Function

Set up the first shell process.

Currently, no DOS Packet arguments are used by this
routine.

A new Boot Cli process is created, and 'dp' is
sent to it. If the boot shell succeeds, then 'dp'
is returned with dp_Res1 = DOSTRUE.
has started.

Inputs

dp - startup arguments specified as a packet

Result

RETURN_OK on success, ERROR_* (from dp_Res2) on failure.

Notes

This function is internal to AROS, and should never be
called by user space.

CliInitNewcli()

Synopsis

IPTR CliInitNewcli(
         struct DosPacket * dp );

Function

Set up a process to be a shell using a startup packet.

Inputs

packet  --  startup arguments that were passed to the shell
            If NULL, defaults will be used

Notes

Called to initialize CLI private data structures, when
the User Shell is in interactive mode.

CliInitRun()

Synopsis

IPTR CliInitRun(
         struct DosPacket * dp );

Function

Set up a process to be a shell.

Inputs

dp  --  startup arguments specified as a packet

Notes

Called to initialize CLI private data structures, when
the User Shell is not interactive.

Close()

Synopsis

BOOL Close(
         BPTR file );

Function

Close a filehandle opened with Open(). If the file was used
with buffered I/O, the final write may fail and thus Close()
may return an error. The file is closed in any case.

Inputs

file - filehandle

Result

0 if there was an error. != 0 on success.

CompareDates()

Synopsis

LONG CompareDates(
         const struct DateStamp * date1,
         const struct DateStamp * date2 );

Function

Compares two dates.

Inputs

date1, date2 - The two dates to compare.

Result

< 0 if date1 is later than date2, == 0 if they are equal or > 0
if date2 is later than date1.

Notes

This is NOT the same ordering as strcmp() !

CreateDir()

Synopsis

BPTR CreateDir(
         CONST_STRPTR name );

Function

Creates a new directory under the given name. If all went well, an
exclusive lock on the new diretory is returned.

Inputs

name - NUL terminated name.

Result

Exclusive lock to the new directory or 0 if it couldn't be created.
IoErr() gives additional information in that case.

CreateNewProc()

Synopsis

struct Process * CreateNewProc(
         const struct TagItem * tags );

struct Process * CreateNewProcTags(
         TAG tag, ... );

Function

Create a new process using the tagitem array.

Inputs

tags - information on the new process.

Result

Pointer to the new process or NULL on error.

Notes

It is possible to supply NP_Input, NP_Output and NP_Error tags
with BNULL values. This is equal to NIL: handle, however if NP_Input
is set to BNULL, NP_Arguments tag will not work. Arguments are
passed to the process via input stream, and the stream needs
to be a valid handle for this. This is original AmigaOS(tm) feature.

CreateProc()

Synopsis

struct MsgPort * CreateProc(
         CONST_STRPTR name,
         LONG pri,
         BPTR segList,
         LONG stackSize );

Function

CreateProc() will create a new process (a process is a superset
of an exec Task), with the name 'name' and the priority 'pri'.

You should pass a segList as returned by LoadSeg() (or similar)
in the 'segList' parameter, and specify the stack size in
'stackSize'.

You should really use CreateNewProc() rather than this function
as it is much more flexible.

Inputs

name      - Name of the new process.
pri       - Starting priority.
segList   - BCPL pointer to a seglist.
stackSize - The size of the initial process stack.

Result

Pointer to the pr_MsgPort in the Process structure. Will
return NULL on failure.

Notes

This will not free the seglist when the process finishes.

This does not return a pointer to the Process structure, but
rather the MsgPort structure contained within it. You can
get the real Process structure by:

struct Process *pr;
struct MsgPort *mp;

mp = CreateProc(...);
pr = (struct Process *)((struct Task *)mp - 1);

// Shouldn't use mp after this point

CurrentDir()

Synopsis

BPTR CurrentDir(
         BPTR lock );

Function

Sets a new directory as the current directory. Returns the old one.
0 is valid in both cases and represents the boot filesystem.

Inputs

lock - Lock for the new current directory.

Result

Old current directory.

DateStamp()

Synopsis

struct DateStamp * DateStamp(
         struct DateStamp * date );

Function

Fills the structure with the current time. Time is measured from
Jan 1, 1978.

Inputs

date - The structure to fill.

Result

date->ds_Days is filled with the days from Jan 1, 1978.
date->ds_Minute is filled with the number of minutes elapsed in the
day. date->ds_Tick is the number of ticks elapsed in the current
minute. A tick happens 50 times a second. DateStamp() ensures that
the day and minute are consistent. All three elements are zero if
the date is unset.

Notes

The original function could only return even multiples of 50 ticks.

DateToStr()

Synopsis

BOOL DateToStr(
         struct DateTime * datetime );

Function

DateToStr converts an AmigaDOS DateStamp to a human
readable ASCII string as requested by your settings in the
DateTime structure.

Inputs

DateTime - a pointer to an initialized DateTime structure. The
           DateTime structure should be initialized as follows:

dat_Stamp: The datestamp to convert to ascii

dat_Format: How to convert the datestamp into
        dat_StrDate. Can be any of the following:

    FORMAT_DOS: AmigaDOS format (dd-mmm-yy). This
        is the default if you specify something other
        than any entry in this list.

    FORMAT_INT: International format (yy-mmm-dd).

    FORMAT_USA: American format (mm-dd-yy).

    FORMAT_CDN: Canadian format (dd-mm-yy).

    FORMAT_DEF default format for locale.


dat_Flags: Modifies dat_Format. The only flag
        used by this function is DTF_SUBST. If set, then
        a string like "Today" or "Monday" is generated
        instead of the normal format if possible.

dat_StrDay: Pointer to a buffer to receive the day of
        the week string. (Monday, Tuesday, etc.). If null,
        this string will not be generated.

dat_StrDate: Pointer to a buffer to receive the date
        string, in the format requested by dat_Format,
        subject to possible modifications by DTF_SUBST. If
        null, this string will not be generated.

dat_StrTime: Pointer to a buffer to receive the time
        of day string. If NULL, this will not be generated.

Result

A zero return indicates that the DateStamp was invalid, and could
not be converted.  Non-zero indicates that the call succeeded.

Delay()

Synopsis

void Delay(
         ULONG timeout );

Function

Waits for at least the time specified as timeout.

Inputs

timeout - the minimum time to wait in ticks (1/50 seconds)

DeleteFile()

Synopsis

BOOL DeleteFile(
         CONST_STRPTR name );

Function

Tries to delete a file or directory by a given name.
May fail if the file is in use or protected from deletion.

Inputs

name - NUL terminated name.

Result

!= 0 if the file is gone, 0 if is still there.
IoErr() gives additional information in that case.

DeleteVar()

Synopsis

LONG DeleteVar(
         CONST_STRPTR name,
         ULONG flags );

Function

Deletes a local or environment variable.

The default is to delete a local variable if one was found,
or to delete a global environment variable otherwise.

A global environment variable will only be deleted for the
type LV_VAR.

Inputs

name  - the name of the variable to delete. Note that variable
        names follow the same syntax and semantics as filesystem
        names.

flags - A combination of the type of variable (low 8 bits), and
        flags to control the behaviour of this routine.
        Currently defined flags:

        GVF_LOCAL_ONLY  - delete a local variable.
        GVF_GLOBAL_ONLY - delete a global environment variable.
        GVF_SAVE_VAR    - delete a global variable permanently.

Result

If non-zero, the variable was deleted successfully,
DOSFALSE otherwise.

Notes

When the GVF_SAVE_VAR flag is set, and only one of the global
variable pair could be deleted (either the in memory or on disk
variable), DOSFALSE will be returned.

DeviceProc()

Synopsis

struct MsgPort * DeviceProc(
         CONST_STRPTR name );

Function

DeviceProc() is an obsolete function that returns the
MsgPort responsible for a DOS device.

DeviceProc() will fail if you ask for the MsgPort of a device
created with AssignPath() as there is no process to return.
If the device requested is an assign, the IoErr() will contain
the Lock to the directory (the function will return the device
on which the lock is set).

Inputs

name - The name of the DOS device, INCLUDING the ':'.

Result

Either a pointer to the MsgPort, or NULL.

Notes

You should really use GetDeviceProc(), as that function
returns a more useful structure (DevProc), that will
persist until FreeDeviceProc() is called on it.

Bugs

Does not support late- and non-bound assigns, or multiple
path assigns very well.

DoPkt()

Synopsis

SIPTR DoPkt(
         struct MsgPort * port,
         LONG action,
         SIPTR arg1,
         SIPTR arg2,
         SIPTR arg3,
         SIPTR arg4,
         SIPTR arg5 );

Function

Send a dos packet to a filesystem and wait for the action to complete.

Notes

Callable from a task.

This function should NOT be used; it's only here for AmigaOS
compatibility.

DupLock()

Synopsis

BPTR DupLock(
         BPTR lock );

Function

Clone a lock on a file or directory. This will only work on shared
locks.

Inputs

lock - Old lock.

Result

The new lock or NULL in case of an error. IoErr() will give additional
information in that case.

DupLockFromFH()

Synopsis

BPTR DupLockFromFH(
         BPTR handle );

Function

Clone a lock on a file or directory. This will only work on shared
locks.

Inputs

lock - Old lock.

Result

The new lock or NULL in case of an error. IoErr() will give additional
information in that case.

EndNotify()

Synopsis

void EndNotify(
         struct NotifyRequest * notify );

Function

End a notification (quit notifying for a request previously sent with
StartNotify()).

Inputs

notify - NotifyRequest used with StartNotify()

ErrorReport()

Synopsis

BOOL ErrorReport(
         LONG code,
         LONG type,
         IPTR arg1,
         struct MsgPort * device );

Function

Displays a requester with Retry/Cancel buttons for an error.
IoErr() is set to "code".

Inputs

code   - The error to put up the requester for
type   - Type of request:
             REPORT_LOCK   - arg1 is a lock (BPTR).
             REPORT_FH     - arg1 is a filehandle (BPTR).
             REPORT_VOLUME - arg1 is a volumenode (C pointer).
             REPORT_INSERT - arg1 is the string for the volume name.

arg1   - Argument according to type (see above)
device - Optional handler task address (obsolete!)

Result

DOSFALSE - user has selected "Retry"
DOSTRUE  - user has selected "Cancel" or code wasn't understood or
           pr_WindowPtr is -1 or if an attempt to open the requester
           fails.

ExAll()

Synopsis

BOOL ExAll(
         BPTR lock,
         struct ExAllData * buffer,
         LONG size,
         LONG data,
         struct ExAllControl * control );

Function

Examine an entire directory.

Inputs

lock    - lock on the directory to be examined
buffer  - buffer for the data that is returned (must be aligned)
          which is filled with (partial) ExAllData structures
          (see NOTES)
size    - size of 'buffer' in bytes
data    - type of the data to be returned
control - a control structure allocated by AllocDosObject()

Result

An indicator of whether ExAll() is finished. If FALSE is returned,
either ExAll() has completed, in which case IoErr() is
ERROR_NO_MORE_ENTRIES, or an error occurred. If a non-zero value is
returned, ExAll() must be called again until it returns FALSE.

Notes

The following information is essential information in the ExAllData
structure:

ed_Type:

    ED_NAME       - filename
    ED_TYPE       - type
    ED_SIZE       - size in bytes
    ED_PROTECTION - protection bits
    ED_DATE       - date information (3 longwords)
    ED_COMMENT    - file comment (NULL if no comment exists)
    ED_OWNER      - owner user and group id

    This is an incremental list, meaning that if you specify ED_OWNER
    you will get ALL attributes!

    Filesystems that support ExAll() must support at least up to
    ED_COMMENT. If a filesystem doesn't support a particular type,
    ERROR_BAD_NUMBER must be returned.

ed_Next: pointer to the next entry in the buffer. The last entry
         has a NULL value for ed_Next.

The control structure have the following fields:

eac_Entries: the number of entries in the buffer after a call to
             ExAll(). Make sure that your code handles the case when
             eac_Entries is 0 and ExAll() returns TRUE.

eac_LastKey: must be initialized to 0 before calling ExAll() for the
             first time.

eac_MatchString: if NULL then information on all files will be returned.
                 If non-NULL it's interpreted as a pointer to a string
                 used for pattern matching which files to return
                 information on. This string must have been parsed by
                 ParsePatternNoCase()!

eac_MatchFunc: pointer to a hook that will be called to decide if an
               entry should be included in the buffer. If NULL, no
               matching function will be called. The hook is called as
               follows:

                    BOOL = MatchFunc(hook, data, typeptr)

ExAllEnd()

Synopsis

void ExAllEnd(
         BPTR lock,
         struct ExAllData * buffer,
         LONG size,
         LONG data,
         struct ExAllControl * control );

Function

Stop an ExAll() operation before returning ERROR_NO_MORE_ENTRIES.

Inputs

The inputs should correspond to the inputs for the ExAll() function.

lock    - lock on the directory that is being examined
buffer  - buffer for data returned
size    - size of 'buffer' in bytes
type    - type of data to be returned
control - control data structure

Notes

The control data structure must have been allocated with
AllocDosObject().

Examine()

Synopsis

LONG Examine(
         BPTR lock,
         struct FileInfoBlock * fib );

Function

Fill in a FileInfoBlock structure concerning a file or directory
associated with a particular lock.

Inputs

lock - lock to examine
fib  - FileInfoBlock where the result of the examination is stored

Result

A boolean telling whether the operation was successful or not.

Notes

FileInfoBlocks should be allocated with AllocDosObject(). You may make
a copy of the FileInfoBlock but, however, this copy may NOT be passed
to ExNext()!

ExamineFH()

Synopsis

BOOL ExamineFH(
         BPTR fh,
         struct FileInfoBlock * fib );

Execute()

Synopsis

BOOL Execute(
         CONST_STRPTR string,
         BPTR input,
         BPTR output );

Function

Execute a CLI command specified in 'string'. This string may contain
features you may use on the shell commandline like redirection using >,
< or >>. Execute() doesn't return until the command(s) that should be
executed are finished.

If 'input' is not NULL, more commands will be read from this stream
until end of file is reached. 'output' will be used as the output stream
of the commands (if output is not redirected). If 'output' is NULL the
current window is used for output -- note that programs run from the
Workbench doesn't normally have a current window.

Inputs

string - pointer to a NULL-terminated string with commands
         (may be NULL)
input  - stream to use as input (may be NULL)
output - stream to use as output (may be NULL)

Result

Boolean telling whether Execute() could find and start the specified
command(s). (This is NOT the return code of the command(s).)

Exit()

Synopsis

void Exit(
         LONG returnCode );

Function

Instantly terminate the program.

Inputs

returnCode - Process' return code.

Result

None.

Notes

Calling this function bypasses normal termination sequence of your program.
Automatically opened libraries will not be closed, destructors will not be
called, etc. Do this only if you really know what are you doing. It's not
advised to use this function at all.

ExNext()

Synopsis

LONG ExNext(
         BPTR lock,
         struct FileInfoBlock * fileInfoBlock );

Function

Examine the next entry in a directory.

Inputs

lock - lock on the direcory the contents of which to examine
fib  - a FileInfoBlock previously initialized by Examine()
       (or used before with ExNext())

Result

success  --  a boolean telling whether the operation was successful
         or not. A failure occurs also if there is no "next" entry in
         the directory. Then IoErr() equals ERROR_NO_MORE_ENTRIES.

Example

To examine a directory, do the following:

1.  Pass a lock on the directory and a FileInfoBlock (allocated by
    AllocDosObject()) to Examine().
2.  Pass the same parameters to ExNext().
3.  Do something with the FileInfoBlock returned.
4.  Call ExNext() repeatedly until it returns FALSE and use the
    information you are provided. When ExNext returns FALSE, check
    IoErr() to make sure that there was no real failure
    (ERROR_NO_MORE_ENTRIES).

Notes

If scanning a filesystem tree recursively, you'll need to allocate a
new FileInfoBlock for each directory level.

Fault()

Synopsis

BOOL Fault(
         LONG code,
         CONST_STRPTR header,
         STRPTR buffer,
         LONG len );

Function

Fault will obtain the error message string for the given error
code. First the header string is copied to the buffer, followed
by a ":" (colon), then the NULL terminated string for the error
message into the buffer.

By convention, error messages are ALWAYS less than 80 (plus 1 for
NULL termination), and ideally less than 60 characters.

If the error code is not known, then the string "Unknown error"
followed by the error number will be added to the string.

Inputs

code   - The error code.
header - The string to prepend to the buffer before the error
         text. This may be NULL in which case nothing is prepended.
buffer - The destination buffer.
len    - Length of the buffer.

Result

Number of characters placed in the buffer. May be 0.

FGetC()

Synopsis

LONG FGetC(
         BPTR file );

Function

Get a character from a buffered file. Buffered I/O is more efficient
for small amounts of data but less for big chunks. You have to
use Flush() between buffered and non-buffered I/O or you'll
clutter your I/O stream.

Inputs

file   - filehandle

Result

The character read or EOF if the file ended or an error happened.
IoErr() gives additional information in that case.

FGets()

Synopsis

STRPTR FGets(
         BPTR fh,
         STRPTR buf,
         ULONG buflen );

Function

Read until NEWLINE (\n), EOF is encountered or buflen-1
characters have been read. If a NEWLINE is read, it will
be the last character in the buffer. The buffer will always
be \0-terminated.

Inputs

fh - Read buffered from this filehandle
buf - Put read chars in this buffer
buflen - The size of the buffer

Result

buf or NULL if the first thing read is EOF.

FilePart()

Synopsis

STRPTR FilePart(
         CONST_STRPTR path );

Function

Get a pointer to the last component of a path, which is normally the
filename.

Inputs

path - pointer AmigaDOS path string
    May be relative to the current directory or the current disk.

Result

A pointer to the first char of the filename!

Example

FilePart("xxx:yyy/zzz/qqq") returns a pointer to the first 'q'.
FilePart("xxx:yyy")         returns a pointer to the first 'y'.
FilePart("yyy")             returns a pointer to the first 'y'.

Bugs

None known.

FindArg()

Synopsis

LONG FindArg(
         CONST_STRPTR template,
         CONST_STRPTR keyword );

Function

Search for keyword in the template string.
Abbreviations are handled.

Inputs

template - template string to be searched
keyword  - keyword to search for

Result

Index of the keyword or -1 if not found.

FindCliProc()

Synopsis

struct Process * FindCliProc(
         ULONG num );

Function

Find a CLI process by its task number. The number must be greater
than 0.

Inputs

num - The task number of the CLI to find.

Result

Pointer to the process if found, NULL otherwise.

Notes

The process calling this function doesn't need to do any locking.

FindDosEntry()

Synopsis

struct DosList * FindDosEntry(
         struct DosList * dlist,
         CONST_STRPTR name,
         ULONG flags );

Function

Looks for the next dos list entry with the right name. The list
must be locked for this. There may be not more than one device
or assign node of the same name. There are no such restrictions
on volume nodes.

Inputs

dlist - the value given by LockDosList() or the last call to
        FindDosEntry().
name  - logical device name without colon. Case insensitive.
flags - the same flags as given to LockDosList() or a subset
        of them.

Result

Pointer to dos list entry found or NULL if the are no more entries.

FindSegment()

Synopsis

struct Segment * FindSegment(
         CONST_STRPTR name,
         struct Segment * seg,
         LONG system );

Function

Search for a resident segment by name and type (system or user).
The first segment that exactly matches the name and type will be
returned. The name is case insensitive. If the system argument is
non-zero, only system segments will be returned (i.e. those that
have a negative seg_UC value); if zero, only user segments will
be returned (i.e. those with a non-negative seg_UC value).

You can continue searching for multiple segments that share the
same name and type by specifying the last returned segment as
the seg argument.

FindSegment() does no locking of the segment list. You should
lock the list by calling Forbid() before calling FindSegment(),
and unlock the list by calling Permit() once you have finished
calling FindSegment().

If you wish to prevent a user segment from being unloaded, you
must increment its seg_UC value before unlocking the list. Once
finished with the segment, you must decrement its seg_UC value
under Forbid()/Permit() protection. The seg_UC value of system
segments should never be altered.

Inputs

name - Name of the segment to search for.
seg  - Start search from this point.
system - Search for a system segment.

Result

A matching segment, or NULL.

FindVar()

Synopsis

struct LocalVar * FindVar(
         CONST_STRPTR name,
         ULONG type );

Function

Finds a local variable structure.

Inputs

name - the name of the variable you wish to find. Note that
       variable names follow the same syntax and semantics
       as filesystem names.
type - The type of variable to be found (see <dos/var.h>).
       Actually, only the lower 8 bits of "type" are used
       by FindVar().

Result

A pointer to the LocalVar structure for that variable if it was
found. If the variable wasn't found, or was of the wrong type,
NULL will be returned.

Flush()

Synopsis

LONG Flush(
         BPTR file );

Function

Flushes any pending writes on the file. If the file was used
for input and there is still some data to read it tries to
seek back to the expected position.

Inputs

file - filehandle

Result

!= 0 on success, 0 on error. IoErr() gives additional information
in that case.

Notes

On AROS calling Flush() from different tasks on the same file handle
is serialised. This means that most of the time it is possible to
do I/O in one task to a file handle where Flush() is being called
in another task on that file handle.
No multi-thread safety is guaranteed though and data may be lost if
I/O is done in parallel from different tasks on the same file handle.

Format()

Synopsis

BOOL Format(
         CONST_STRPTR devicename,
         CONST_STRPTR volumename,
         ULONG dostype );

Function

Initialise a filesystem for use by the system. This instructs
a filesystem to write out the data that it uses to describe the
device.

The device should already have been formatted.

Inputs

devicename - Name of the device to format.
volumename - The name you wish the volume to be called.
dostype    - The DOS type you wish on the disk.

Result

!= 0 if the format was successful, 0 otherwise.

FPutC()

Synopsis

LONG FPutC(
         BPTR file,
         LONG character );

Function

Write a character to a file handle.

The write is buffered.

If the file handle is an interactive stream,
the buffer is automatically flushed on a linefeed,
carriage return or ASCII NUL.

Inputs

file      - Filehandle to write to.
character - Character to write.

Result

The character written or EOF in case of an error.
IoErr() gives additional information in that case.

Notes

You should use Flush() when switching between
buffered and unbuffered IO.

FPuts()

Synopsis

LONG FPuts(
         BPTR file,
         CONST_STRPTR string );

Function

This routine writes an unformatted string to the filehandle.  No
newline is appended to the string.  This routine is buffered.

Inputs

file   - Filehandle to write to.
string - String to write.

Result

0 if all went well or EOF in case of an error.
IoErr() gives additional information in that case.

FRead()

Synopsis

LONG FRead(
         BPTR fh,
         APTR block,
         ULONG blocklen,
         ULONG number );

Function

Read a number of blocks from a file.
The read is buffered.

Inputs

fh - Read from this file
block - The data is put here
blocklen - This is the size of a single block
number - The number of blocks

Result

The number of blocks read from the file or 0 on EOF.
This function may return fewer than the requested number of blocks.
IoErr() gives additional information in case of an error.

FreeArgs()

Synopsis

void FreeArgs(
         struct RDArgs * args );

Function

FreeArgs() will clean up after a call to ReadArgs(). If the
RDArgs structure was allocated by the system in a call to
ReadArgs(), then it will be freed. If however, you allocated
the RDArgs structure with AllocDosObject(), then you will
have to free it yourself with FreeDosObject().

Inputs

args - The data used by ReadArgs(). May be NULL, in which case,
       FreeArgs() does nothing.

Result

Some memory will have been returned to the system.

FreeDeviceProc()

Synopsis

void FreeDeviceProc(
         struct DevProc * dp );

Function

FreeDeviceProc() will clean up after a call to GetDeviceProc().

Inputs

dp - DevProc structure as returned by GetDeviceProc(), or NULL.

Result

None.

FreeDosEntry()

Synopsis

void FreeDosEntry(
         struct DosList * dlist );

Function

Free a dos list entry created with MakeDosEntry().

Inputs

dlist - pointer to dos list entry. May be NULL.

FreeDosObject()

Synopsis

void FreeDosObject(
         ULONG type,
         APTR ptr );

Function

Frees an object allocated with AllocDosObject.

Inputs

type - object type. The same parameter as given to AllocDosObject().
ptr  - Pointer to object.

FWrite()

Synopsis

LONG FWrite(
         BPTR fh,
         CONST_APTR block,
         ULONG blocklen,
         ULONG numblocks );

Function

Buffered write of a number of blocks to a stream.
May write fewer blocks than requested.

Inputs

fh        - Write to this file
block     - The data begins here
blocklen  - number of bytes per block.  Must be > 0.
numblocks - number of blocks to write.  Must be > 0.

Result

The number of blocks written to the file or EOF on error. IoErr()
gives additional information in case of an error.

Notes

Some releases of AmigaOS may not clear IoErr(), while AROS
does. For full backwards compatibility, you may want to call
SetIoErr(0L) before FWrite() if you need to be able to check
the error code.

GetArgStr()

Synopsis

STRPTR GetArgStr();

Function

Returns a pointer to the argument string passed to the current
process at startup.

Result

Pointer to argument string.

GetConsoleTask()

Synopsis

struct MsgPort * GetConsoleTask();

Function

Return the console handler for the current Process. The return
type depends upon whether AROS is running binary compatible.

Inputs

None.

Result

The address of the console handler, or NULL if none is set.

Notes

You will only get NULL from this call if you call it on a Task,
or when the Process is not attached to a console.

GetCurrentDirName()

Synopsis

BOOL GetCurrentDirName(
         STRPTR buf,
         LONG len );

Function

Copies the name of the current directory from the CLI structure
into the buffer. If the buffer is too small the name is truncated,
and a failure is returned. If the current process doesn't have
a CLI structure, a 0 length string is put into the buffer and a
failure is returned.

Inputs

buf - Buffer for the name.
len - Size of the buffer in bytes.

Result

!=0 on success, 0 on failure. IoErr() gives additional information
in that case.

Notes

Documented as returning ERROR_OBJECT_WRONG_TYPE if CLI structure
is not present but actually it fallbacks to NameFromLock().

GetDeviceProc()

Synopsis

struct DevProc * GetDeviceProc(
         CONST_STRPTR name,
         struct DevProc * dp );

Function

GetDeviceProc() will search for the filesystem handler which
you should send a command to for a specific path.

By calling GetDeviceProc() multiple times, the caller will
be able to handle multi-assign paths.

The first call to GetDeviceProc() should have the |dp| parameter
as NULL.

Inputs

name - Name of the object to find.
dp   - Previous result of GetDeviceProc() or NULL.

Result

A pointer to a DevProc structure containing the information
required to send a command to a filesystem.

Bugs

Currently doesn't return dvp_DevNode for locks which are
relative to "PROGDIR:", ":", or the current directory.

GetFileSysTask()

Synopsis

struct MsgPort * GetFileSysTask();

Function

Return the default filesystem handler for this process.

Inputs

None.

Result

The default filesystem handler for this process.

GetProgramDir()

Synopsis

BPTR GetProgramDir();

Function

This function will return the shared lock on the directory that
the current process was loaded from. You can use this to help
you find data files which were supplied with your program.

A NULL return is possible, which means that you may be running
from the Resident list.

You should NOT under any circumstance UnLock() this lock.

Result

A shared lock on the directory the program was started from.

GetProgramName()

Synopsis

BOOL GetProgramName(
         STRPTR buf,
         LONG len );

Function

Copies the name of the current program from the CLI structure
into the buffer. If the buffer is too small the name is truncated,
and a failure is returned. If the current process doesn't have
a CLI structure, a 0 length string is put into the buffer and a
failure is returned.

Inputs

buf - Buffer for the name.
len - Size of the buffer in bytes.

Result

!=0 on success, 0 on failure. IoErr() gives additional information
in that case.

GetPrompt()

Synopsis

BOOL GetPrompt(
         STRPTR buf,
         LONG len );

Function

Copies the prompt from the CLI structure into the buffer. If the
buffer is too small the name is truncated, and a failure is returned.
If the current process doesn't have a CLI structure, a 0 length string
is put into the buffer and a failure is returned.

Inputs

buf - Buffer for the prompt.
len - Size of the buffer in bytes.

Result

!=0 on success, 0 on failure. IoErr() gives additional information
in that case.

GetSegListInfo()

Synopsis

ULONG GetSegListInfo(
         BPTR seglist,
         const struct TagItem * taglist );

ULONG GetSegListInfoTags(
         BPTR seglist,
         TAG tag, ... );

Function

returns information about a loaded seglist.

Inputs

seglist - The segment list.

Result

returns number of tags aknowledged.

GetVar()

Synopsis

LONG GetVar(
         CONST_STRPTR name,
         STRPTR buffer,
         LONG size,
         LONG flags );

Function

This function will return the value of a local or environmental
variable in the supplied buffer.

It is advised to only use ASCII characters with a variable, but
this is not required.

If GVF_BINARY_VAR is not specified, this function will stop putting
characters into the destination buffer when a '\n' is hit, or the
end of the buffer is reached. Otherwise it will complete fill the
buffer.

Inputs

name    -   the name of the variable you want.
buffer  -   Space to store the returned variable.
size    -   Length of the buffer in bytes.
flags   -   A combination of the type of variable to get (lower
            8 bits) and flags that control the value of this
            function. Current flags are:

            GVF_GLOBAL_ONLY    - only tries to get a global variable.
            GVF_LOCAL_ONLY     - only tries to get a local variable.
            GVF_BINARY_VAR     - do not stop at a '\n' character.
            GVF_DONT_NULL_TERM - no NULL termination. This only
                                 applies to GVF_BINARY_VAR.

Result

Will return the number of characters put in the buffer, or -1
if the variable is not defined. The '\n' character if it exists
will not be placed in the buffer.

If the value would overflow the user buffer, then the number of
characters copied into the buffer will be returned and the buffer
truncated.The buffer will be NULL terminated unless
GVF_DONT_NULL_TERM is set.

IoErr() will contain either:
  ERROR_OBJECT_NOT_FOUND
      if the variable is not defined.
  ERROR_BAD_NUMBER
      if the size of the buffer is 0.
  the total length of the variable
      otherwise.

Bugs

LV_VAR is the only type that can be global.

Info()

Synopsis

LONG Info(
         BPTR lock,
         struct InfoData * parameterBlock );

Function

Get information about a volume in the system.

Inputs

lock           - a lock on any file on the volume for which information
                 should be supplied, or 0
parameterBlock - pointer to an InfoData structure

Result

Boolean indicating success or failure. If TRUE (success) the
'parameterBlock' is filled with information on the volume.

Notes

Supplying a lock of 0 will return InfoData from the task that is
returned from GetFileSysTask() (usually the boot volume's filesystem
"SYS:").

Inhibit()

Synopsis

LONG Inhibit(
         CONST_STRPTR name,
         LONG onoff );

Function

Stop a filesystem from being used.

Inputs

name  - Name of the device to inhibit (including a ':')
onoff - Specify whether to inhibit (DOSTRUE) or uninhibit (DOSFALSE)
        the device

Result

A boolean telling whether the action was carried out.

Notes

After uninhibiting a device anything might have happened like the disk
in the drive was removed.

Input()

Synopsis

BPTR Input();

Function

Returns the current input stream or 0 if there is no current
input stream.

Result

Input stream handle.

InternalLoadSeg()

Synopsis

BPTR InternalLoadSeg(
         BPTR fh,
         BPTR table,
         LONG_FUNC * funcarray,
         LONG * stack );

Function

Loads from fh.
Functionarray is a pointer to an array of functions. See below.

This function really only tries to load the different file
formats aos, elf and aout.

Inputs

fh            : Filehandle to load from
table         : ignored
funcarray : array of functions to be used for read, seek, alloc and free
   FuncTable[0] -> bytes  = ReadFunc(readhandle, buffer, length), DOSBase
                   D0                D1          A0      D0       A6
   FuncTable[1] -> Memory = AllocFunc(size,flags), ExecBase
                   D0                 D0   D1      A6
   FuncTable[2] -> FreeFunc(memory, size), ExecBase
                            A1       D0    A6
   FuncTable[3] -> pos    = SeekFunc(readhandle, pos, mode), DOSBase
                   D0                D0          D1   D2
stack         : pointer to storage (LONG) for stacksize.
                (currently ignored)

Result

seglist  - pointer to loaded Seglist or NULL in case of failure.

Notes

FuncTable[3] is not used for Amiga HUNK format files, but is required
             for ELF.

Bugs

Use of table and stack are not implemented, yet!

InternalUnLoadSeg()

Synopsis

BOOL InternalUnLoadSeg(
         BPTR seglist,
         VOID_FUNC freefunc );

Function

Unloads a seglist loaded with InternalLoadSeg().

Inputs

seglist  - Seglist
freefunc - Function to be called to free memory

Result

DOSTRUE if everything went OK.

IoErr()

Synopsis

SIPTR IoErr();

Function

Get the dos error code for the current process.

Result

Error code.

IsFileSystem()

Synopsis

BOOL IsFileSystem(
         CONST_STRPTR devicename );

Function

Query the device whether it is a filesystem.

Inputs

devicename      - Name of the device to query.

Result

TRUE if the device is a filesystem, FALSE otherwise.

Notes

DF0:, HD0:, ... are filesystems.
CON:, PIPE:, AUX:, ... are not

In AmigaOS if devicename contains no ":" then result
is always TRUE. Also volume and assign names return
TRUE.

IsInteractive()

Synopsis

LONG IsInteractive(
         BPTR file );

Function

Check if file is bound to an interactive device such as a console
or shell window.

Inputs

file   - filehandle

Result

!= 0 if the file is interactive, 0 if it is not.

LoadSeg()

Synopsis

BPTR LoadSeg(
         CONST_STRPTR name );

Function

Loads an executable file into memory. Each hunk of the loadfile
is loaded into its own memory section and a handle on all of them
is returned. The segments can be freed with UnLoadSeg().

Inputs

name - NUL terminated name of the file.

Result

Handle to the loaded executable or NULL if the load failed.
IoErr() gives additional information in that case.

Notes

This function is built on top of InternalLoadSeg()

Lock()

Synopsis

BPTR Lock(
         CONST_STRPTR name,
         LONG accessMode );

Function

Gets a lock on a file or directory. There may be more than one
shared lock on a file but only one if it is an exclusive one.
Locked files or directories may not be deleted.

Inputs

name       - NUL terminated name of the file or directory.
accessMode - One of SHARED_LOCK
                    EXCLUSIVE_LOCK

Result

Handle to the file or directory or 0 if the object couldn't be locked.
IoErr() gives additional information in that case.

Notes

The lock structure returned by this function is different
from that of AmigaOS (in fact it is identical to a filehandle).
Do not try to read any internal fields.

LockDosList()

Synopsis

struct DosList * LockDosList(
         ULONG flags );

Function

Waits until the desired dos lists are free then gets a lock on them.
A handle is returned that can be used for FindDosEntry().
Calls to this function nest, i.e. you must call UnLockDosList()
as often as you called LockDosList(). Always lock all lists
at once - do not try to get a lock on one of them then on another.

Inputs

flags - what lists to lock

Result

Handle to the dos list. This is not a direct pointer
to the first list element but to a pseudo element instead.

LockRecord()

Synopsis

BOOL LockRecord(
         BPTR fh,
         ULONG offset,
         ULONG length,
         ULONG mode,
         ULONG timeout );

Function

Lock a portion of a file for exclusive access. A timeout may be
specified which is the maximum amount of time to wait for the record
to be available.

Inputs

fh      - file handle for the file to lock a record of
offset  - starting position of the lock
length  - length of the record in bytes
mode    - lock type
timeout - timeout interval measured in ticks (may be 0)

Result

Success/failure indicator.

Notes

Record locks are cooperative, meaning that they only affect other calls
to LockRecord().

LockRecords()

Synopsis

BOOL LockRecords(
         struct RecordLock * recArray,
         ULONG timeout );

Function

Lock several records at the same time. The timeout specified is applied
to each lock to attempt. The array of RecordLock:s is terminated with
an entry where rec_FH is equal to NULL.

Inputs

recArray - array of records to lock
timeout  - maximum number of ticks to wait for a lock to be ready

Result

Success/failure indication. In case of a success, all the record locks
are locked. In case of failure, no record locks are locked.

Notes

A set of records should always be locked in the same order so as to
reduce possiblities of deadlock.

MakeDosEntry()

Synopsis

struct DosList * MakeDosEntry(
         CONST_STRPTR name,
         LONG type );

Function

Create an entry for the dos list. Depending on the type this may
be a device, a volume or an assign node.

Inputs

name - pointer to name
type - type of list entry to create

Result

The new device entry, or NULL if it couldn't be created.

MakeLink()

Synopsis

LONG MakeLink(
         CONST_STRPTR name,
         SIPTR dest,
         LONG soft );

Function

MakeLink() will create a link between two files or directories.
A link is a filesystem object that refers to another file.

A soft link refers to another file or directory by name, and is
resolved by the filesystem and the caller. Soft links are not
restricted to the same volume and the target does not have to exist.

A hard link refers to another file by the location on a disk, and
is resolved by the filesystem. Hard links are restricted to files
or directories on the same volume.

Inputs

name - The name of the link to create
dest - If 'soft' is TRUE this must be a filename; if it is FALSE a lock
       pointing to the file to be hard-linked must be provided
soft - TRUE, if a soft link is to be created, FALSE for a hard link

Result

boolean - DOSTRUE or DOSFALSE. On error, IoErr() will contain more
information.

MatchEnd()

Synopsis

void MatchEnd(
         struct AnchorPath * AP );

Function

Free the memory and file locks that were allocated by calls to
MatchFirst() and MatchNext().

Inputs

AP - pointer to Anchor Path structure which had been passed to
     MatchFirst() before.

Result

None.

MatchFirst()

Synopsis

LONG MatchFirst(
         CONST_STRPTR pat,
         struct AnchorPath * AP );

Function

Searches for the first file or directory that matches a given pattern.
MatchFirst() initializes the AnchorPath structure for you but you
must initilize the following fields: ap_Flags, ap_Strlen, ap_BreakBits
and ap_FoundBreak. The first call to MatchFirst() also passes you
the first matching file, which you can examine in ap_Info, and
the directory the file is in, in ap_Current->an_Lock. After the first
call to MatchFirst(), call MatchNext(). The search begins wherever the
current directory is set to (see CurrentDir()). For more info on
patterns, see ParsePattern().

Inputs

pat - pattern to search for
AP  - pointer to (initilized) AnchorPath structure

Result

0     = success
other = DOS error code

MatchNext()

Synopsis

LONG MatchNext(
         struct AnchorPath * AP );

Function

Find next file or directory that matches a given pattern.
See <dos/dosasl.h> for more docs and how to control MatchNext().

Inputs

AP - pointer to Anchor Path structure which had been passed to
     MatchFirst() before.

Result

Zero on success, or error code on failure.

See also

MatchFirst() MatchEnd() CurrentDir() Examine() ExNext() ParsePattern() <dos/dosasl.h


MatchPattern()

Synopsis

BOOL MatchPattern(
         CONST_STRPTR pat,
         CONST_STRPTR str );

Function

Check if a string matches a pattern. The pattern must be a pattern as
output by ParsePattern(). Note that this routine is case sensitive.

Inputs

pat - Pattern string (as returned by ParsePattern())
str - The string to match against the pattern 'pat'

Result

Boolean telling whether the string matched the pattern.

MatchPatternNoCase()

Synopsis

BOOL MatchPatternNoCase(
         CONST_STRPTR pat,
         CONST_STRPTR str );

Function

Similar to MatchPattern(), only case insensitive (see there for
more information). For use with ParsePatternNoCase().

Inputs

pat - Pattern as returned by ParsePatternNoCase()
str - String to match against the pattern 'pat'

Result

Boolean telling whether the match was successful or not.

MaxCli()

Synopsis

ULONG MaxCli();

Function

Returns the highest Cli number currently in use. Since processes
may be added and removed at any time the returned value may already
be wrong.

Result

Maximum Cli number (_not_ the number of Clis).

NameFromFH()

Synopsis

BOOL NameFromFH(
         BPTR fh,
         STRPTR buffer,
         LONG length );

Function

Get the full path name associated with file-handle into a
user supplied buffer.

Inputs

fh     - File-handle to file or directory.
buffer - Buffer to fill. Contains a NUL terminated string if
         all went well.
length - Size of the buffer in bytes.

Result

!=0 if all went well, 0 in case of an error. IoErr() will
give additional information in that case.

NameFromLock()

Synopsis

BOOL NameFromLock(
         BPTR lock,
         STRPTR buffer,
         LONG length );

Function

Get the full path name associated with a lock to a file or
directory into a user supplied buffer.
If the lock is zero the buffer will be filled with "SYS:".

Inputs

lock   - Lock to file or directory or 0.
buffer - Buffer to fill. Contains a NUL terminated string if
         all went well.
length - Size of the buffer in bytes.

Result

!=0 if all went well, 0 in case of an error. IoErr() will
give additional information in that case.

NewLoadSeg()

Synopsis

BPTR NewLoadSeg(
         CONST_STRPTR file,
         const struct TagItem * tags );

BPTR NewLoadSegTags(
         CONST_STRPTR file,
         TAG tag, ... );

Function

Loads an executable file into memory via LoadSeg() and takes
additional actions based upon the supplied tags.

Inputs

file - NULL terminated name of the file
tags - pointer to the tagitems

Result

Handle to the loaded executable or 0 if the load failed.
IoErr() gives additional information in that case.

Bugs

As there are no tags currently defined, all this function does is
call LoadSeg()

NextDosEntry()

Synopsis

struct DosList * NextDosEntry(
         struct DosList * dlist,
         ULONG flags );

Function

Looks for the next dos list entry with the right type. The list
must be locked for this.

Inputs

dlist - the value given by LockDosList() or the last call to
        FindDosEntry().
flags - the same flags as given to LockDosList() or a subset
        of them.

Result

Pointer to dos list entry found or NULL if the are no more entries.

Open()

Synopsis

BPTR Open(
         CONST_STRPTR name,
         LONG accessMode );

Function

Opens a file for read and/or write depending on the accessmode given.

Inputs

name       - NUL terminated name of the file.
accessMode - One of MODE_OLDFILE   - open existing file
                    MODE_NEWFILE   - delete old, create new file
                                     exclusive lock
                    MODE_READWRITE - open new one if it doesn't exist

Result

Handle to the file or 0 if the file couldn't be opened.
IoErr() gives additional information in that case.

OpenFromLock()

Synopsis

BPTR OpenFromLock(
         BPTR lock );

Function

Convert a lock into a filehandle. If all went well the lock
will be gone. In case of an error it must still be freed.

Inputs

lock - Lock to convert.

Result

New filehandle or 0 in case of an error. IoErr() will give
additional information in that case.

Output()

Synopsis

BPTR Output();

Function

Returns the current output stream or 0 if there is no current
output stream.

Result

Output stream handle.

ParentDir()

Synopsis

BPTR ParentDir(
         BPTR lock );

Function

Returns a lock to the parent directory of the supplied lock.

Inputs

lock - Lock to get parent directory of.

Result

Returns a lock to the parent directory or NULL, in which case the
supplied lock has no parent directory (because it is the root
directory) or an error occured. IoErr() returns 0 in the former case
and a different value on error.

ParentOfFH()

Synopsis

BPTR ParentOfFH(
         BPTR fh );

Function

Lock the directory a file is located in.

Inputs

fh   - Filehandle of which you want to obtain the parent

Result

lock - Lock on the parent directory of the filehandle or
       NULL for failure.

ParsePattern()

Synopsis

LONG ParsePattern(
         CONST_STRPTR Source,
         STRPTR Dest,
         LONG DestLength );

Function

Takes a pattern containing wildcards and transforms it into some
intermediate representation for use with the MatchPattern() function.
The intermediate representation is longer but generally a buffer
size of 2*(strlen(Source)+1) is enough. Nevertheless you should check
the returncode to be sure that everything went fine.

Inputs

Source     - Pattern describing the kind of strings that match.
             Possible tokens are:
             #x     - The following character or item is repeaded 0 or
                      more times.
             ?      - Item matching a single non-NUL character.
             a|b|c  - Matches one of multiple strings.
             ~x     - This item matches if the item x doesn't match.
             (a)    - Parens
             [a-z]  - Matches a single character out of the set.
             [~a-z] - Matches a single non-NUL character not in the set.
             'c     - Escapes the following character.
             *      - Same as #?, but optional.
Dest       - Buffer for the destination.
DestLength - Size of the buffer.

Result

 1 - There are wildcards in the pattern (it might match more than
     one string).
 0 - No wildcards in it, all went fine.
-1 - An error happened. IoErr() gives additional information in
     that case.

ParsePatternNoCase()

Synopsis

LONG ParsePatternNoCase(
         CONST_STRPTR Source,
         STRPTR Dest,
         LONG DestLength );

Function

Similar to ParsePattern(), only case insensitive (see there
for more information). For use with MatchPatternNoCase().

PathPart()

Synopsis

STRPTR PathPart(
         CONST_STRPTR path );

Function

Returns a pointer to the character after the last
directory in path (see examples).

Inputs

path - Search this path.

Result

A pointer to a character in path.

Example

PathPart("xxx:yyy/zzz/qqq") would return a pointer to the last '/'.
PathPart("xxx:yyy") would return a pointer to the first 'y').

PrintFault()

Synopsis

BOOL PrintFault(
         LONG code,
         CONST_STRPTR header );

Function

Prints the header and the text associated with the error code to
the console (buffered), then sets the value returned by IoErr() to
the error code given.

Inputs

code   - Error code.
header - Text to print before the error message. This may be NULL
         in which case only the error message is printed.

Result

Boolean success indicator.

PutStr()

Synopsis

LONG PutStr(
         CONST_STRPTR string );

Function

This routine writes an unformatted string to the default output.  No
newline is appended to the string and any error is returned.  This
routine is buffered.

Inputs

str   - Null-terminated string to be written to default output

Result

error - 0 for success, -1 for any error.

Read()

Synopsis

LONG Read(
         BPTR file,
         APTR buffer,
         LONG length );

Function

Read some data from a given file. The request is directly
given to the filesystem - no buffering is involved. For
small amounts of data it's probably better to use the
buffered I/O routines.

Inputs

file   - filehandle
buffer - pointer to buffer for the data
length - number of bytes to read. The filesystem is
         advised to try to fulfill the request as well
         as possible.

Result

The number of bytes actually read, 0 if the end of the
file was reached, -1 if an error happened. IoErr() will
give additional information in that case.

ReadArgs()

Synopsis

struct RDArgs * ReadArgs(
         CONST_STRPTR template,
         SIPTR * array,
         struct RDArgs * rdargs );

Function

Parses the commandline, a given string or Input() and fills
an argument array according to the options template given.
The array must be initialized to the wanted defaults before
each call to ReadArgs(). If the rdargs argument is NULL
ReadArgs() tries to parse the commandline and continues
on the input channel if it just consists of a single '?',
prompting the user for input.

Inputs

template - Template string. The template string is given as
           a number of options separated by ',' and modified
           by '/' modifiers, e.g. 'NAME,WIDTH/N,HEIGHT/N'
           means get a name string and two numbers (width and
           height). The possible modifiers are:
           /S Option is a switch. It may be either set or
              left out.
           /T Option is a boolean value. Requires an argument
              which may be "ON", "YES" (setting the respective
              argument to 1), "OFF" or "NO" (setting the
              respective argument to 0).
           /N Option is a number. Strings are not allowed.
              If the option is optional, a pointer to the
              actual number is returned. This is how you know
              if it was really given. The number is always of type
              LONG.
           /A Argument is required. If it is left out ReadArgs()
              fails.
           /K The keyword must be given when filling the option.
              Normally it's skipped.
           /M Multiple strings or, when used in combination with /N,
              numbers. The result is returned as an array of pointers
              to strings or LONGs, and is terminated with NULL. /M
              eats all strings that don't fit into any other option.
              If there are unfilled /A arguments after parsing they
              steal strings from /M. This makes it possible to, for
              example, write a Copy command template like
              'FROM/A/M,TO/A'. There may be only one /M option in a
              template.
           /F Eats the rest of the line even if there are option
              keywords in it.
array    - Array to be filled with the result values. The array must
           be intialized to the default values before calling
           ReadArgs().
rdargs   - An optional RDArgs structure determining the type of
           input to process.

Result

A handle for the memory allocated by ReadArgs(). Must be freed
with FreeArgs() later.

ReadItem()

Synopsis

LONG ReadItem(
         STRPTR buffer,
         LONG maxchars,
         struct CSource * input );

Function

Read an item from a given character source. Items are words
or quoted strings separated by whitespace or '=' just like on
the commandline. The separator is unread and the output string
is terminated by a NUL character.

Inputs

buffer   - Buffer to be filled.
maxchars - Size of the buffer. Must be at least 1 (for the NUL
           terminator).
input    - A ready to use CSource structure or NULL which means
           "read from the input stream".

Result

One of ITEM_UNQUOTED - Normal word read.
       ITEM_QUOTED   - Quoted string read.
       ITEM_NOTHING  - End of line found. Nothing read.
       ITEM_EQUAL    - '=' read. Buffer is empty.
       ITEM_ERROR    - An error happened.

Notes

This function handles conversion of '**', '*"', etc. inside quotes.

This function has well known bugs, and should be avoided
in new applications.

Bugs

1. Forgets to unread a separator character (equal sign, whitespace or
   tabulation).
2. Tries to unread an end-of-line, which actually causes unreading the
   last read character of CSource if supplied. Even if it's not a
   separator, but belongs to the last read item.
3. IoErr() is never modified by this function.

As AOS programs that use ReadItem() depend on this broken behaviour,
it will not be fixed.

4. If maxchars == 0, buffer[0] is set to NUL anyway.

ReadLink()

Synopsis

LONG ReadLink(
         struct MsgPort * port,
         BPTR lock,
         CONST_STRPTR path,
         STRPTR buffer,
         ULONG size );

Function

Read the filename referred to by the soft-linked object contained
in |path| (relative to the lock |lock|) into the buffer |buffer|.
The variable |path| should contain the name of the object that
caused the original OBJECT_IS_SOFT_LINK error.

Inputs

port            - The handler to send the request to.
lock            - Object that |path| is relative to.
path            - Name of the object that caused the error.
buffer          - Buffer to fill with resolved filename.
size            - Length of the buffer.

Result

>= 0    length of resolved filename in case of success
== -1   failure, see IoErr() for more information
== -2   buffer size was too small to store resolved filename

Relabel()

Synopsis

LONG Relabel(
         CONST_STRPTR drive,
         CONST_STRPTR newname );

Function

Change names of a volume.

Inputs

drive   - The name of the device to rename (including the ':').
newname - The new name for the device (without the ':').

Result

A boolean telling whether the name change was successful or not.

RemAssignList()

Synopsis

LONG RemAssignList(
         CONST_STRPTR name,
         BPTR lock );

Function

Remove an entry from a multi-dir assign. The entry removed will be
the first one that the SameLock() function called on the 'lock'
parameter returns that they belong to the same object.

The entry for this lock will be removed from the lock, and the
lock for the entry in the list will be unlocked.

Inputs

name    - Name of the device to remove lock from. This should
          not contain the trailing ':'.
lock    - Lock on the object to remove from the list.

Result

success - Have we actually succeeded

Bugs

If this is the first lock in a list, this will not set
dol_Device/dol_Unit correctly.

RemDosEntry()

Synopsis

LONG RemDosEntry(
         struct DosList * dlist );

Function

Removes a given dos list entry from the dos list. Automatically
locks the list for writing.

Inputs

dlist - pointer to dos list entry.

Result

!=0 if all went well, 0 otherwise.

Notes

Since anybody who wants to use a device or volume node in the
dos list has to lock the list, filesystems may be called with
the dos list locked. So if you want to add a dos list entry
out of a filesystem don't just wait on the lock but serve all
incoming requests until the dos list is free instead.

RemSegment()

Synopsis

LONG RemSegment(
         struct Segment * seg );

Function

Remove the segment seg from the DOS resident command list.

The segment to be removed should be in the list, and should
have a usercount of 0. System or internal segment cannot be
removed (although they can be replaced).

Inputs

seg - Segment to remove.

Result

!= 0    Segment was removed
== 0    Segment was not removed (not in list, or not free).

Rename()

Synopsis

LONG Rename(
         CONST_STRPTR oldName,
         CONST_STRPTR newName );

Function

Renames a given file. The old name and the new name must point to the
same volume.

Inputs

oldName - Name of the file to rename
newName - New name of the file to rename

Result

boolean - DOSTRUE or DOSFALSE. IoErr() provides additional information
on DOSFALSE.

ReplyPkt()

Synopsis

void ReplyPkt(
         struct DosPacket * dp,
         SIPTR res1,
         LONG res2 );

RunCommand()

Synopsis

LONG RunCommand(
         BPTR segList,
         ULONG stacksize,
         CONST_STRPTR argptr,
         ULONG argsize );

Function

RunCommand() will run the command loaded in the |segList| with the
arguments specified with a new stack of |stacksize| bytes. Note
that the stacksize may be extended if this is required.

The return code of the command run will be returned.

This call will not return until the command has completed.

Inputs

segList         - segment of program to run.
stacksize       - size of the stack to use.
argptr          - pointer to NULL-terminated arguments.
argsize         - size of the arguments string.

Result

The return code from the program, or -1 if the command could not be
started (e.g. no memory for the stack). See also IoErr().

Notes

Programs expect the argument string to end with a newline ('\n')
character (ReadArgs() requires it to work properly).

SameDevice()

Synopsis

BOOL SameDevice(
         BPTR lock1,
         BPTR lock2 );

Function

Checks if two locks are on the same device.

Inputs

lock1, lock2 - locks to compare

Result

DOSTRUE when locks are on the same device

SameLock()

Synopsis

LONG SameLock(
         BPTR lock1,
         BPTR lock2 );

Function

Compares two locks.

Inputs

lock1, lock2 - locks to compare

Result

LOCK_SAME        - locks points to the same object
LOCK_SAME_VOLUME - locks are on the same volume
LOCK_DIFFERENT   - locks are different

Seek()

Synopsis

LONG Seek(
         BPTR file,
         LONG position,
         LONG mode );

Function

Changes the current read/write position in a file and/or
reads the current position, e.g to get the current position
do a Seek(file,0,OFFSET_CURRENT).

This function may fail (obviously) on certain devices such
as pipes or console handlers.

Inputs

file     - filehandle
position - relative offset in bytes (positive, negative or 0).
mode     - Where to count from. Either OFFSET_BEGINNING,
           OFFSET_CURRENT or OFFSET_END.

Result

Absolute position in bytes before the Seek(), -1 if an error
happened. IoErr() will give additional information in that case.

SelectInput()

Synopsis

BPTR SelectInput(
         BPTR fh );

Function

Sets the current input stream returned by Input() to a new
value. Returns the old input stream.

Inputs

fh - New input stream.

Result

Old input stream handle.

SelectOutput()

Synopsis

BPTR SelectOutput(
         BPTR fh );

Function

Sets the current output stream returned by Output() to a new
value. Returns the old output stream.

Inputs

fh - New output stream.

Result

Old output stream handle.

SendPkt()

Synopsis

void SendPkt(
         struct DosPacket * dp,
         struct MsgPort   * port,
         struct MsgPort   * replyport );

Function

Send a packet to a handler without waiting for the result. The packet
will be returned to 'replyport'.

Inputs

packet    - the (initialized) packet to send
port      - the MsgPort to send the packet to
replyport - the MsgPort to which the packet will be replied

Result

This function is callable from a task.

SetArgStr()

Synopsis

STRPTR SetArgStr(
         CONST_STRPTR string );

Function

Sets the arguments to the current process. The arguments must be
reset to the original value before process exit.

Inputs

string - The new argument string (a C string).

Result

The address of the previous argument string. May be NULL.

SetComment()

Synopsis

LONG SetComment(
         CONST_STRPTR name,
         CONST_STRPTR comment );

Function

Change the comment on a file or directory. The comment may be any
NUL-terminated string. The supported size varies from filesystem
to filesystem. In order to clear an existing comment, an empty
string should be specified.

Inputs

name    - name of the file
comment - new comment for the file.

Result

Boolean success indicator. IoErr() gives additional information upon
failure.

SetConsoleTask()

Synopsis

struct MsgPort * SetConsoleTask(
         struct MsgPort * handler );

Function

Set the console handler for the current process, and return the
old handler.

Inputs

handler - The new console handler for the process.

Result

The address of the old handler.

SetCurrentDirName()

Synopsis

BOOL SetCurrentDirName(
         CONST_STRPTR name );

Function

Sets the name of the current directory in the CLI structure.
If the name doesn't fit the old name is kept and a failure
returned. If the current process doesn't have a CLI structure
this function does nothing.

Inputs

name - Name for the current directory.

Result

!=0 on success, 0 on failure.

Bugs

Never copies more than 255 bytes.

SetFileDate()

Synopsis

BOOL SetFileDate(
         CONST_STRPTR name,
         const struct DateStamp * date );

Function

Change the modification time of a file or directory.

Inputs

name - name of the file
date - new file time

Result

Boolean success indicator. IoErr() gives additional information upon
failure.

SetFileSize()

Synopsis

LONG SetFileSize(
         BPTR file,
         LONG offset,
         LONG mode );

Function

Change the size of a file.

Inputs

file   - filehandle
offset - relative size
mode   - OFFSET_BEGINNING, OFFSET_CURRENT or OFFSET_END

Result

New size of the file or -1 in case of an error.
IoErr() gives additional information in that case.

SetFileSysTask()

Synopsis

struct MsgPort * SetFileSysTask(
         struct MsgPort * task );

Function

Set the default filesystem handler for the current process,
the old filesystem handler will be returned.

Inputs

task - The new filesystem handler.

Result

The old filesystem handler.

SetIoErr()

Synopsis

SIPTR SetIoErr(
         SIPTR result );

Function

Sets the dos error code for the current process.

Inputs

result - new error code

Result

Old error code.

SetMode()

Synopsis

LONG SetMode(
         BPTR fh,
         LONG mode );

Function

SetMode() can be used to change a console handler between
RAW: mode and CON: mode.

Inputs

fh   - The filehandle describing the console.
mode - The new mode of the console:
           1 - RAW: mode
           0 - CON: mode

Result

This function will return whether it succeeded:

== DOSTRUE  console mode changed
!= DOSTRUE  console mode change failed.

SetOwner()

Synopsis

BOOL SetOwner(
         STRPTR name,
         ULONG owner_info );

Inputs

name       - name of the file
owner_info - (UID << 16) + GID

Result

!= 0 if all went well, 0 else. IoErr() gives additional
information in that case.

SetProgramDir()

Synopsis

BPTR SetProgramDir(
         BPTR lock );

Function

This function will set a shared lock on the directory that the
current program was loaded from. This can be accessed through
the path PROGDIR:. The use of this path is to allow the program
to easily access files which are supplied with the program.

Inputs

lock - The lock to set as the new program directory. NULL
       is a valid value.

Result

This function will return the old program directory lock.

Notes

This function will not duplicate the lock, so you should not
free the lock.

SetProgramName()

Synopsis

BOOL SetProgramName(
         CONST_STRPTR name );

Function

Sets the name for the current program in the CLI structure. If the
name doesn't fit the old name is kept and a failure is returned.
If the current process doesn't have a CLI structure this function
does nothing.

Inputs

name - Name for the current program.

Result

!= 0 on success, 0 on failure.

Bugs

Never copies more than 255 bytes.

SetPrompt()

Synopsis

BOOL SetPrompt(
         CONST_STRPTR name );

Function

Sets the prompt in the current CLI structure. If the name doesn't
fit the old name is kept and a failure is returned. If the current
process doesn't have a CLI structure this function does nothing.

Inputs

name - The prompt to be set.

Result

!=0 on success, 0 on failure.

Bugs

Never copies more than 255 bytes.

SetProtection()

Synopsis

LONG SetProtection(
         CONST_STRPTR name,
         ULONG protect );

Inputs

name    - name of the file
protect - new protection bits

Result

!= 0 if all went well, 0 else. IoErr() gives additional
information in that case.

SetVar()

Synopsis

BOOL SetVar(
         CONST_STRPTR name,
         CONST_STRPTR buffer,
         LONG size,
         LONG flags );

Function

This function will set a local or environmental variable. Although
it is recommended that you only use ASCII strings within variables,
this is not actually required.

Variable names are not case sensitive.

SetVar() for an already existing variable changes the variable's
value to "buffer".

Inputs

name        -   The name of the variable to set.
buffer      -   The actual data of the variable.
size        -   The size of the data in the buffer.
flags       -   Combination of the type of variable to set (lower
                8 bits of the value), and various flags which control
                this function. Flags defined are:

                GVF_LOCAL_ONLY  -   set a local variable only,
                GVF_GLOBAL_ONLY -   set a global environmental
                                    variable only.
                GVF_SAVE_VAR    -   If GVF_GLOBAL_ONLY is set, then
                                    this flag will cause SetVar() to
                                    save the variable to ENVARC: as well
                                    as to ENV:.
                GVF_BINARY_VAR and GVF_DONT_NULL_TERM are stored in
                the lv_Flags field for local variables, but not
                used otherwise by SetVar().

                Note the default is to set a local environmental
                variable.

                The following variable types are defined:
                LV_VAR          - local environment variable
                LV_ALIAS        - shell alias
                LVF_IGNORE      - internal shell use

                LV_VAR and LV_ALIAS should be treated as
                "exclusive or".

Result

Zero if this function failed, non-zero otherwise.

Notes

It is possible to have two variables with the same name as
long as they have different types.

Bugs

Only type LV_VAR can be made global.

If you set GVF_SAVE_VAR, and this function returns failure, the
variable may have still been set in ENV:.

SetVBuf()

Synopsis

LONG SetVBuf(
         BPTR file,
         STRPTR buff,
         LONG type,
         LONG size );

Function

Changes the buffering modes and buffer size for a filehandle.
With buff == NULL, the current buffer will be deallocated (if it
was not a user-supplied one) and a new one of (approximately) size
will be allocated. If buffer is non-NULL, it will be used for
buffering and must be at least max(size,208) bytes long, and MUST
be longword aligned. If size is -1, then only the buffering mode
will be changed.

Inputs

file - Filehandle
buff - buffer pointer for buffered I/O or NULL.
type - buffering mode (see <dos/stdio.h>)
size - size of buffer for buffered I/O (sizes less than 208 bytes
       will be rounded up to 208), or -1.

Result

0 if operation succeeded.

SplitName()

Synopsis

LONG SplitName(
         CONST_STRPTR name,
         ULONG separator,
         STRPTR buf,
         LONG oldpos,
         LONG size );

Function

Split a path into parts at the position of separator.

Inputs

name - Split this path
separator - Split it at this separator
buf - Copy the current part into this buffer
oldpos - Begin at this place with the search for separator.
        If you call this function for the first time, set it
        to 0.
size - The size of the buffer. If the current part of the
        path is bigger than size-1, only size-1 bytes will
        be copied.

Result

The next position to continue for the next part or -1 if
there is no separator after name+oldpos.

StartNotify()

Synopsis

BOOL StartNotify(
         struct NotifyRequest * notify );

Function

Send a notification request to a filesystem. You will then be notified
whenever the file (or directory) changes.

Inputs

notify - a notification request for the file or directory to monitor

Result

Success/failure indicator.

Notes

The file or directory connected to a notification request does not
have to exist at the time of calling StartNotify(). The NotifyRequest
used with this function should not be altered while active.

StrToDate()

Synopsis

BOOL StrToDate(
         struct DateTime * datetime );

Function

Converts a human readable ASCII string into an AmigaDOS
DateStamp.

Inputs

DateTime - a pointer to an initialized DateTime structure.
        The structure should be initialized as follows:

        dat_Stamp: The converted date will be written here

        dat_Format: How to convert the datestamp into
            dat_StrDate. Can be any of the following:

            FORMAT_DOS: AmigaDOS format (dd-mmm-yy). This
                    is the default if you specify something other
                    than any entry in this list.

            FORMAT_INT: International format (yy-mmm-dd).

            FORMAT_USA: American format (mm-dd-yy).

            FORMAT_CDN: Canadian format (dd-mm-yy).

            FORMAT_DEF: default format for locale.


        dat_Flags: Modifies dat_Format. The only flag
                used by this function is DTF_FUTURE. If set, then
                a string like "Monday" refers to the next monday.
                Otherwise it refers to the last monday.

        dat_StrDay: Ignored.

        dat_StrDate: Pointer to valid string representing the
                date. This can be a "DTF_SUBST" style string such
                as "Today" "Tomorrow" "Monday", or it may be a
                string as specified by the dat_Format byte. This
                will be converted to the ds_Days portion of the
                DateStamp. If this pointer is NULL,
                DateStamp->ds_Days will not be affected.

        dat_StrTime: Pointer to a buffer which contains the
                time in the ASCII format hh:mm:ss. This will be
                converted to the ds_Minutes and ds_Ticks portions
                of the DateStamp.  If this pointer is NULL,
                ds_Minutes and ds_Ticks will be unchanged.

Result

A zero return indicates that a conversion could not be performed. A
non-zero return indicates that the DateTime.dat_Stamp variable
contains the converted values.

StrToLong()

Synopsis

LONG StrToLong(
         CONST_STRPTR string,
         LONG * value );

Function

Convert a string to a long number.

Inputs

string - The value to convert
value - The result is returned here

Result

How many characters in the string were considered when it was
converted or -1 if no valid number could be found.

Notes

The routine doesn't check if the number is too large.
Examples of valid number: 5, -1, +3, +0007, etc.

SystemTagList()

Synopsis

LONG SystemTagList(
         CONST_STRPTR command,
         const struct TagItem * tags );

LONG SystemTags(
         CONST_STRPTR command,
         TAG tag, ... );

Function

Execute a command via a shell. As defaults, the process will use the
current Input() and Output(), and the current directory as well as the
path will be inherited from your process. If no path is specified, this
path will be used to find the command.

Normally, the boot shell is used but other shells may be specified
via tags. The tags are passed through to CreateNewProc() except those
that conflict with SystemTagList(). Currently, these are

    NP_Seglist
    NP_FreeSeglist
    NP_Entry
    NP_Input
    NP_Error
    NP_Output
    NP_CloseInput
    NP_CloseOutput
    NP_CloseError
    NP_HomeDir
    NP_Cli
    NP_Arguments
    NP_Synchrounous
    NP_UserData

Inputs

command - program and arguments as a string
tags    - see <dos/dostags.h>. Note that both SystemTagList() tags and
          tags for CreateNewProc() may be passed.

Result

The return code of the command executed or -1 if the command could
not run because the shell couldn't be created. If the command is not
found, the shell will return an error code, usually RETURN_ERROR.

Notes

You must close the input and output filehandles yourself (if needed)
after System() returns if they were specified via SYS_Input or
SYS_Output (also, see below).

You may NOT use the same filehandle for both SYS_Input and SYS_Output.
If you want them to be the same CON: window, set SYS_Input to a
filehandle on the CON: window and set SYS_Output to NULL. Then the
shell will automatically set the output by opening CONSOLE: on that
handler. Note that SYS_Error also follows this rule, so passing it
set to NULL will automatically set the error by opening CONSOLE: on
that handler.

If you specified SYS_Asynch, both the input and the output filehandles
will be closed when the command is finished (even if this was your
Input() and Output()).

UnGetC()

Synopsis

LONG UnGetC(
         BPTR file,
         LONG character );

Function

Push a character back into a read filehandle. If you've read
a character from that file you may always push at least 1 character
back. UnGetC(file,-1) ungets the last character read. This also
works for EOF.

Inputs

file      - Filehandle you've read from.
character - Character to push back or EOF.

Result

!=0 if all went well, 0 if the character couldn't be pushed back.
IoErr() gives additional information in that case.

UnLoadSeg()

Synopsis

BOOL UnLoadSeg(
         BPTR seglist );

Function

Free a segment list allocated with LoadSeg().

Inputs

seglist - The segment list.

Result

success = returns whether everything went ok. Returns FALSE if
          seglist was NULL.

UnLock()

Synopsis

BOOL UnLock(
         BPTR lock );

Function

Free a lock created with Lock().

Inputs

lock - The lock to free

UnLockDosList()

Synopsis

void UnLockDosList(
         ULONG flags );

Function

Frees a lock on the dos lists given by LockDosList().

Inputs

flags - the same value as given to LockDosList().

UnLockRecord()

Synopsis

BOOL UnLockRecord(
         BPTR fh,
         ULONG offset,
         ULONG length );

Function

Release a lock made with LockRecord().

Inputs

fh     - filehandle the lock was made on
offset - starting position of the lock
length - length of the record in bytes

Notes

The length and offset must match the corresponding LockRecord()
call.

UnLockRecords()

Synopsis

BOOL UnLockRecords(
         struct RecordLock * recArray );

Function

Release an array of record locks obtained with LockRecords().

Inputs

recArray - array of record locks (previously locked with LockRecords())

Result

success - Boolean success indicator.

Notes

An array of records may not be modified when records are locked.

VFPrintf()

Synopsis

LONG VFPrintf(
         BPTR file,
         CONST_STRPTR format,
         RAWARG argarray );

Function

Write a formatted (RawDoFmt) string to a specified file (buffered).

Inputs

file     - Filehandle to write to
format   - RawDoFmt() style formatting string
argarray - Pointer to array of formatting values

Result

Number of bytes written or -1 for an error

VFWritef()

Synopsis

LONG VFWritef(
         BPTR fh,
         CONST_STRPTR fmt,
         const IPTR * argarray );

Function

Write a formatted string (with supplied values) to a specified file.
The string may be of any length and the routine is buffered.
The following format commands may be used (preceded by a '%') a la
printf().

    S  - string (C style)
    Tx - writes a left justified string padding it to be (at least)
         x bytes long
    C  - character
    Ox - octal number; maximum width x characters
    Xx - hexadecimal number; maximum width x characters
    Ix - decimal number; maximum width x chararcters
    N  - decimal number; any length
    Ux - unsigned decimal number; maximum width x characters
    $  - ignore parameter

Note: 'x' above is the character value - '0'.

Inputs

fh       - file to write the output to
fmt      - format string
argarray - pointer to an array of formatting values

Result

The number of bytes written or -1 if there was an error.

VPrintf()

Synopsis

LONG VPrintf(
         CONST_STRPTR format,
         RAWARG argarray );

Function

Writes a formatted string to standard output.

Inputs

format   - RawDoFmt like format string
argarray - Pointer to array of formatting values

Result

Number of bytes written or -1 for an error

WaitForChar()

Synopsis

LONG WaitForChar(
         BPTR file,
         LONG timeout );

Function

Wait for a character to arrive at a filehandle. The filehandle
can be either a console handle, or a regular file. For a regular
file most filesystems will return a character immediately, but
sometimes (for example, a network handler) the character may not
have arrived.

Inputs

file    - File to wait for a character on.
timeout - Number of microseconds to wait for the character
          to arrive.

Result

!= 0    if a character arrived before the timeout expired
== 0    if no character arrived

Notes

Many filesystems do not implement this function.

WaitPkt()

Synopsis

struct DosPacket * WaitPkt();

Function

Wait for a packet to arrive at your process's pr_MsgPort. It will call
pr_PktWait if such a function is installed.

Inputs

None.

Result

packet - The packet we received.

Notes

The packet will be released from the port.

This function should NOT be used. It's there only for AmigaOS
compatibility.

Write()

Synopsis

LONG Write(
         BPTR file,
         APTR buffer,
         LONG length );

Function

Write some data from a given file. The request is directly
given to the filesystem - no buffering is involved. For
small amounts of data it's probably better to use the
buffered I/O routines.

Inputs

file   - filehandle
buffer - pointer to buffer for the data
length - number of bytes to write. The filesystem is
         advised to try to fulfill the request as good
         as possible.

Result

The number of bytes actually written, 0 if the end of the
file was reached, -1 if an error happened. IoErr() will
give additional information in that case.

WriteChars()

Synopsis

LONG WriteChars(
         CONST_STRPTR buf,
         ULONG buflen );

Function

Writes the contents of the buffer to the current output stream.
The number of bytes written is returned.

Inputs

buf - Buffer to be written.
buflen - Size of the buffer in bytes.

Result

The number of bytes written or EOF on failure. IoErr() gives
additional information in that case.

Copyright © 1995-2024, The AROS Development Team. Tutti i diritti riservati.
Amiga® č un marchio registrato di Amiga Inc. Tutti i diritti sui marchi vanno ai legittimi proprietari.