http://www.aros.org AROS-Exec AROS-Exec Archives Power2People
kitty mascottop logo menu

AROS Application Development Manual -- Writing Portable Software

Introduction

Back in the old days it was easy: both integer and address types had a size of 32 bit and the bytes were ordered in big-endian. But because AROS is portable, developers have to mind certain things or their code will not run on all AROS ports.

Endianness

Computer architectures differ in the order the bytes of integer values are stored in memory, i.e. their endianness. On little-endian systems the least significant byte is stored first, i.e. on systems where a byte has 8 bits the bits 0 to 7 are stored in address n, 8 to 15 in address n+1, 16 to 23 in n+2 and so on. On big-endian systems it's the other way round.

Endianness becomes important when you write binary data to files or try to access hardware like graphics cards etc.

You can query the endianness this way:

#include <aros/cpu.h>
...
if (AROS_BIG_ENDIAN) {
    Puts("We are big-endian.");
} else {
    Puts("We are little-endian.");
}

AROS_BIG_ENDIAN is always defined, if you include aros/cpu.h. It has a value of 1 on big-endian systems and of 0 on little-endian systems. This allows for testing the define with both C "if" and preprocessor "#if". Since the macro is always defined, however, "#ifdef" can not be used to test it.

You can find some conversion macros, like AROS_WORD2BE, in the header aros/macros.h. Some peek and poke functions with built-in endianness conversion, can be found in aros/io.h.

Data Types

The AROS data types are defined in the header exec/types.h.

The fundamental integer data types have a defined size, which is the same for both 32-bit and 64-bit systems:

Type sizeof(Type)
BYTE, UBYTE 1
WORD, UWORD 2
LONG, ULONG 4
QUAD, UQUAD 8

This is different from C types like int and long, the sizes of which which depend on the hardware.

IPTR

IPTR is defined as an unsigned integer type which is large enough to store a pointer. You should use it to store an address in an integer type. The following source code:

...
ULONG address;
GetAttr(obj, Gimme_Address, &address);
...

has to be translated for AROS to:

...
IPTR address;
GetAttr(obj, Gimme_Address, &address);
...

Other notable things which are affected by this: TagItems (the ti_Data field is now an IPTR instead of ULONG), BOOPSI classes (e.g. the return value of DoMethod()), ReadArgs(), VPrintf(), VFPrintf(), and more.

64-bit variables

The type of 64-bit variables is QUAD (unsigned: UQUAD). This is, for example, returned by the function SMult64() of utility.library. To access the high- and low-order 32-bit values of the 64-bit variable, use LOW32OF64() and HIGH32OF64() which are defined in aros/64bit.h.

Hooks

Hooks are used when a system function takes a pointer to a callback function as an argument. They are used quite often in Zune user interfaces. There are two ways to define them:

Register-based:

#include <utility/hooks.h>
...
static struct Hook myhook;
...
AROS_UFH3(ULONG, myfunction,
AROS_UFHA(struct Hook *, h, A0),
AROS_UFHA(Object *, object, A2),
AROS_UFHA(APTR, msg, A1))
{
    AROS_USERFUNC_INIT
    ....
    return retval;
    AROS_USERFUNC_EXIT
}

int main(void)
{
    myhook.h_Entry = (HOOKFUNC)myfunction;
    ...
    DoMethod(button, MUIM_Notify, MUIA_Pressed, FALSE,
        (IPTR)app, 2, MUIM_CallHook, (IPTR)&myhook);
    ...
}

UFH3 means User Function Head with 3 arguments. You can append an "S" if you want to make the function static.

Stack-based:

#include <proto/alib.h>
#include <utility/hooks.h>
...
static struct Hook myhook;
...
static ULONG myfunc(struct Hook *hook, Object *object, APTR msg)
{
    ...
    return retval;
}

int main(void)
{
    myhook.h_Entry = HookEntry;
    myhook.h_SubEntry = (HOOKFUNC)myfunc;
    ...
    DoMethod(button, MUIM_Notify, MUIA_Pressed, FALSE,
        (IPTR)app, 2, MUIM_CallHook, (IPTR)&myhook);
    ...
}

In contrast to register-based you have to use the function address in h_SubEntry and HookEntry from amiga.lib in h_Entry. HookEntry is a function which forwards the register arguments to stack arguments.

User Function Prototype

If you want to define a prototype for a register-based user function you have to use the AROS_UFP (User Function Prototype) macro, like this:

AROS_UFP3(ULONG, myfunction,
    AROS_UFPA(struct Hook *, h, A0),
    AROS_UFPA(Object *, obj, A2),
    AROS_UFPA(APTR, msg, A1));

Hints

So far only user functions with 3 arguments were demonstrated, but the UFxx macros are way more flexible. You can define functions with 0 to 15 arguments, as you can see in the header aros/asmcall.h. But if you need a hook function for the system (e.g. for Zune callback functions) you need the special case with 3 arguments and they must be given in the order A0, A2, A1.


When porting old Amiga software to AROS you will sometimes find code for hooks which omits arguments, e.g.:

ULONG ASM RenderHookFunc(reg (a1) struct LVDrawMsg *msg, reg (a2) struct ImageNode *in)

This doesn't work on AROS because

  • the arguments aren't in the order A0, A2, A1.
  • the argument for A0 is mentioned at all.

A valid translation with register macros of the line above would be:

AROS_UFH3(ULONG, RenderHookFunc,
AROS_UFHA(struct Hook *, h, A0),
AROS_UFHA(struct ImageNode *, in, A2),
AROS_UFHA(struct LVDrawMsg *, msg, A1))

Arguments can only be omitted come after the arguments that are necessary, e.g.:

  • A1 can be omitted if only A0 and A2 are necessary
  • A1 and A2 can be omitted if only A0 is necessary

In case you should wonder what these A0, A1, A2 are: Those are register names of the 68k architecture. On other platforms they are forwarded to other registers or even put on the stack.

Calling User Functions

For the standard case with 3 arguments, utility.library provides the function CallHookPkt():

retval = CallHookPkt(hook, par1, par2);

There is another macro named UFC (User Function Call) if you want to call the user function with more than 3 arguments:

retval = AROS_UFC4(ULONG, myfunction,
        AROS_UFCA(APTR, value1, A0),
        AROS_UFCA(Object *, value2, A2),
        AROS_UFCA(APTR, value3, A1),
        AROS_UFCA(LONG, value4, D1) );

Variadic functions with structure parameters

Messages for BOOPSI/Zune methods are defined as structs. The structure elements are then used as arguments for the variadic function DoMethod(), e.g.:

struct MUIP_Application_SetMenuCheck { ULONG MethodID; ULONG MenuID; LONG stat; };
DoMethod(obj, MUIM_Application_SetMenuCheck, 10, 20);

This causes problems on AROS for several reasons:

  • small data types, like WORD, aren't expanded correctly, i.e. some bytes contain trash data
  • on some CPUs the stack grows upwards
  • on some architectures the parameters are passed on stack, in registers, or even in both

The solution is to prefix all elements in the struct with STACKED:

struct MUIP_Application_SetMenuCheck { STACKED ULONG MethodID;
        STACKED ULONG MenuID; STACKED LONG stat; };

Varoitus

Don't use types smaller than ULONG for message structures. It will not work on big-endian.

Tag Identifiers/Values

The original AmigaOS didn't use the tags below TAG_USER (have a look a at utility/tagitem.h if you're not certain) which means, you shouldn't use tags at or near TAG_USER because then they might interfere with the OS's own tags. To solve this, AROS does use the tags below TAG_USER and the various implementers need not fear that their tags may overlap with the ones from the system. The file utility/tagitem.h now contains the basic offsets for the various parts of the OS. In the future, it might be possible for users to allocate ranges of tags for specific uses.

To write programs easily portable to 64-bit architectures make sure that all variadic arguments to functions using AROS_SLOWSTACKTAGS macros (NewObject(), MUI_NewObject(), CreateNewProcTags(), and many more) are of a type with size equal to the Tag type for tag identifiers and the IPTR type for tag values. If you use any arguments with smaller types, the functions mentioned may receive randomly corrupted argument values.

TO ensure this size, add UL to tag identifiers:

#define MUIA_NList_Horiz_DeltaFactor  0x9d510032UL

You don't have to care about this when you're OR-ing with TAG_USER or derivatives, like MUIB_MUI, MUIB_RSVD, MUIB_ZUNE and MUIB_AROS:

#define MUIA_Application_Active  (MUIB_MUI|0x004260ab)

Forwarding Variadic Parameters to a Variadic Function

Sometimes, variadic functions are needed which forward their parameters to a variadic system function.

On 68k this was often done like this:

APTR DoSuperNew(struct IClass *cl,Object *obj,ULONG tag1, ...)
{
    return (APTR)(DoSuperMethod(cl,obj,OM_NEW,&tag1,TAG_DONE));
}

This isn't portable because you can't control how the compiler stores the variadic parameters.

Instead, this has to be written this way:

IPTR DoSuperNew(struct IClass *cl, Object *obj, IPTR tag1, ...)
{
    AROS_SLOWSTACKTAGS_PRE(tag1)
    retval = (IPTR)DoSuperMethod(cl, obj, OM_NEW, AROS_SLOWSTACKTAGS_ARG(tag1));
    AROS_SLOWSTACKTAGS_POST
}

Note that the name of the return variable "retval" is defined by the macros and can't be changed.

Functions with no return value can be written in a similar way with the macros AROS_NR_SLOWSTACKTAGS_PRE and AROS_NR_SLOWSTACKTAGS_POST. All these slowstacktags macros are defined in utility/tagitem.h.

For variadic hook functions exists similar to macros in clib/alib_protos.h. Example usage:

ULONG MyCallHookPktA(Object *obj, struct Hook *hook, ...)
{
    AROS_SLOWSTACKHOOKS_PRE(hook)
    retval = CallHookPkt(hook, obj, AROS_SLOWSTACKHOOKS_ARG(hook));
    AROS_SLOWSTACKHOOKS_POST
}

Also clib/alib_protos.h defines AROS_SLOWSTACKMETHODS_XXX macros. DoMethod() is implemented with this. As an application developer you'll normally not come in touch with these macros.

Node

The order of elements of struct Node differs, on some AROS platforms, from the original AmigaOS version. See exec/nodes.h. This is considered a bug and will be changed for the V1 ABI. For now, however, we have to live with it. There are three cases you'll have to look at:

  • Initialization like struct Node node = {0, 0, type, pri,name};

  • Nodes with exposed structure elements like:

    struct Mynode {
        struct Node * mn_succ;
        struct Node * mn_pred;
        UBYTE  mn_Type;
        BYTE   mn_pri;
        char   * mn_Name;
        ULONG  mn_color;
    };
    
  • Nodes which are based on MinNodes, e.g.:

    struct Mynode {
        struct MinNode * mn;
        char           * id;
    };
    ...
    struct Mynode *node;
    ...
    ((struct Node*)node)->ln_Name = "XYZ";
    

You're on the safe side if you have struct Node at the beginning:

struct Mynode {
    struct Node mn;
    ULONG  mn_color;
} mynode;

Then set the elements explicitly:

mynode.mn->ln_Type = type;
mynode.mn->ln_Pri = pri;
mynode.mn->ln_Name = name;
mynode.mn_color = color;

Huomautus

This is only a temporary requirement. When V1 ABI is released struct Node will be the same on all platforms.

Include files

Include headers for shared libraries from proto, e.g.:

#include <proto/intuition.h>

It happens that the include files for workbench.library aren't called "workbench.h" etc. for AmigaOS, but rather "wb.h": clib/wb_protos.h, defines/wb.h, inline/wb.h, wb_pragmas.h and proto/wb.h. For AROS "wb" is replaced by the library's name "workbench", to follow the common naming system. Wrapper includes are provided for consistency to (old) AmigaOS programs, but it's recommended to use the new names clib/workbench_protos.h, defines/workbench.h, inline/workbench.h, workbench_pragmas.h and proto/workbench.h instead.

Cloning RastPorts

AROS uses an external driver to access the graphics hardware. Since the nature of this driver is unknown to AROS, it is no longer valid to clone a RastPort by simply copying it. To be compatible, there are three new functions (in AROS) or macros (on Amiga): * CreateRastPort(), CloneRastPort() and FreeRastPort(). Call CreateRastPort() for an empty RastPort, call CloneRastPort() to create a copy, and call FreeRastPort() when you're done with it.

This approach produces equivalent code on the Amiga but on AROS it can slow things down a bit. If you must preserve the original state of the RastPort, it's safer to create a clone, work on it and then dispose of it again. It can also be faster, if you would have to make a lot of changes to the RastPort, to create two clones and set them to the two states you need. But your code should not depend on certain gains or losses of speed due to cloned RastPorts since the behaviour of the underlying graphics system is undefined.

Registers and CPUs

Some effort has been put in defining a way for AROS to write code which is hardware independent. To achieve this, a couple of macros have been defined. Some of them have already been mentioned above.

AROS_ASMSYMNAME(n)
Use this macro to access the assembler symbol n from C.
AROS_CSYMNAME(n)
Use this macro to access the C symbol n from assembler.
AROS_CDEFNAME(n)
Use this macro to define the assembler symbol n in such a way that it can be accessed from C.
AROS_SLIB_ENTRY(n,l)
Use this macro to get the name of a function n which is part of the shared library l.
AROS_UFH#(...)
Use this macro to declare a function which needs its arguments passed in registers. "#" is the number of arguments the function expects. The parameters of the macro are the return type of the function, its name and the parameters in the AROS_UFHA() macros. If the function is an assembler function, use the AROS_ASMSYMNAME() macro to get its name.
AROS_UFHA(t,n,r)
Use this macro to declare a parameter for a function which is declared with the AROS_UFH*() macro. It takes three arguments: The type of the parameter, the name of the parameter and the register the parameter is expected in.
AROS_UFC#(...)
Call a function which needs its arguments in registers. Works the same way as AROS_UFH*().
AROS_LH#[I](...)
Use this macro to declare a function which is part of a shared library. "#" is the number of arguments the function expects. If the function doesn't need the library base passed, you can speed things up by appending "I" to the macros name. The parameters of the macro are the return type of the function, its name, the parameters in AROS_LHA() macros, the type of the library, the name of the variable the library base is passed in, the offset in the function table (1 is the first offset and 5 is the first offset for a user function) and the name of the library.
AROS_LHA(t,n,r)
Use this macro to declare a parameter for a function which is declared with the AROS_LH*() macro. It takes three arguments: The type of the parameter, the name of the parameter and the register the parameter is expected in.
AROS_LC#[I](...)
Call a function which is part of a shared library. Works the same way as AROS_LH*().
AROS_STACK_GROWS_DOWNWARDS
Has the value 1 if it is true, and 0 otherwise.
AROS_BIG_ENDIAN
Has the value 1 if the machine is big-endian (e.g. Amiga), or 0 if little-endian (e.g. PCs). Endianess means the way a number is stored in memory. An Amiga stores 0x11223344 as 0x11 0x22 0x33 0x44 in memory while a PC does it as 0x44 0x33 0x22 0x11.
AROS_SIZEOFULONG
The result of sizeof(ULONG).
AROS_WORDALIGN
The minimal alignment of 16-bit numbers in the memory of the computer (WORD and UWORD).
AROS_LONGALIGN
The minimal alignment of 32-bit numbers in the memory of the computer (LONG and ULONG).
AROS_PTRALIGN
The minimal alignment of pointers in the memory of the computer (e.g. char * or APTR).
AROS_DOUBLEALIGN
The minimal alignment of 64-bit IEEE floating point numbers in the memory of the computer (double).
AROS_WORSTALIGN
The worst possible alignment of any data type in the memory of the computer (usually the same as AROS_DOUBLEALIGN).
AROS_ALIGN(x)
Get the next possible address where one can put any data type. This macro will return x if any data type can be put at x. Most of the time, this macro is used like this: Get a buffer, put some data in it and then use AROS_ALIGN() to find out where the next data can be put.
AROS_SLOWSTACKTAGS
This macro is defined, when it's necessary to use GetTagsFromStack() and FreeTagsFromStack() instead of just passing the address of the tag of the first tagitem.
AROS_SLOWSTACKMETHODS
This macro is defined, when it's necessary to use GetMsgFromStack() and FreeMsgFromStack() instead of just passing the address of the method ID.

Porting from AmigaOS

AmigaOS source code often contains compiler attributes like __asm and __saveds, to use registers for parameters etc. Sometimes, macros like ASM and SAVEDS are used to get some platform/compiler independence.

The following macros/attributes can be removed or replaced by empty macros:

  • SAVEDS/__saveds/__geta4
  • ASM/__asm
  • CHIP/__chip
  • STDARGS/__stdargs

VARARGS68K is for variadic functions and has to be defined this way:

#define VARARG68K __stackparm

SDI

Another macro set used for compatibility between different Amiga-like operating systems and compilers is the set of are the SDI macros. Currently, they aren't fully compatible with AROS, and have to be replaced by AROS macros.


Copyright © 1995-2024, The AROS Development Team. All rights reserved.
Amiga®, AmigaOS®, Workbench and Intuition are trademarks of Amiga Inc. All other trademarks belong to their respective owners.